Novo has strengthened its high-quality, Australian based exploration portfolio by executing binding term sheets relating to TechGen Metals Limited's (ASX: TG1) (TechGen) John Bull Gold Project in the New England Orogen of NSW, and Manhattan Corporation Limited's (ASX: MHC) (Manhattan) Tibooburra Gold Project in the Albert Goldfields in northwestern NSW.
Both projects demonstrate prospectivity for significant discovery and resource definition and align with Novo's strategy of identifying and exploring projects with > 1 Moz Au potential.
These high-grade gold projects compliment the recent announced landholding consolidation that forms the Toolunga Project in the Onslow District in Western Australia
TechGen - John Bull Gold Project
The John Bull Gold Project (John Bull) is an advanced exploration opportunity, located in the emerging New England district NSW.
The agreement with TechGen grants Novo an option to acquire an 80% interest in the Micks Bull tenement and a 70% interest in the John Bull tenement.
A costean by Kennecott Australia in 1983 intersected 160 m @ 1.2 g/t Au, including 5 m @ 18.0 g/t Au and 5 m @ 7.1 g/t Au1.
Soil sampling completed by TechGen highlighted an exceptionally high-order gold anomaly over 900 m long and 250 m wide at > 100 ppb Au with seven samples reporting > 4.5 g/t Au2.
Drilling completed by TechGen includes 17 RC holes for 2,249.5 m (2022 and 2023) with an effective test to ~120 m vertical depth.
Peak results from four approximately 100 m spaced sections of shallow RC drilling by TechGen over 320 m strike include:
94 m @ 0.95 g/t Au from 4 m including 66 m @ 1.14 g/t Au, and 17 m @ 1.08 g/t Au from 109 m (JBRC0006)3
68 m @ 1.00 g/t Au from surface, including 23 m @ 2.02 g/t Au (JBRC0001)4
All sections remain open at depth and the system remains open along strike.
An Induced Polarisation (IP) geophysical survey over part of the target produced anomalies over known mineralisation5 and an additional four IP chargeability targets remain to be tested.
Multiple targets identified for drill testing, including directly down dip and along strike of significant intercepts, co-incident or separate Au soil anomalies and IP anomalies, and under historic workings.
Novo is planning > 2,000 m drilling for H1 2025, following the completion of detailed mapping and infill and extensional geochemical sampling.
Manhattan - Tibooburra
The Tibooburra Gold Project is an advanced exploration opportunity, located in northwestern NSW and covering the historical Albert Goldfield.
The agreement with Manhattan grants Novo an option to acquire a 70% interest in the tenements comprising the Tibooburra Project.
The Tibooburra Gold Project includes six granted exploration licences over 630 sq km, including more than 200 historic workings and 34 km of mineralised trends on multiple lines of workings, with two advanced drill-ready target areas (New Bendigo and Clone) already defined.
New Bendigo - shows extensive historical workings over 2 km strike.
Several drill programs by Manhattan tested over 530 m strike and intersected multiple high-order intercepts. Extremely high-grade gold has been observed hosted in laminated quartz veins in historical diamond drilling.
Peak drill results include6:
30 m at 4.03 g/t Au from 11 m, including 5 m at 20.86 g/t Au (NB0033)
16 m at 13.89 g/t Au from 1 m, including 3 m at 69.20 g/t Au (NB0083)
8 m at 40.5 g/t Au from 70 m, including 3 m at 105.34 g/t Au (NB0089)
7 m at 13.10 g/t Au from 97 m, including 5 m at 18.01 g/t Au (NB0113)
13 m at 6.16 g/t Au from 50 m, including 3 m at 25.48 g/t Au (NB0122)
Clone - extensive historical workings over ~450 m strike and 20 to 40 m in depth.
Drilling by Manhattan in 2023 highlighted potential for shallow dipping high-grade gold mineralisation. Excellent drill results were returned from 11 holes over 250 m strike to a maximum depth below surface of 75m, including7:
7 m at 7.23 g/t Au from 81 m, including 3 m at 16.1 g/t Au (CL0007)
9 m at 6.03 g/t Au from 16 m (CL0010)
6 m at 4.22 g/t Au from 66 m, including 2 m at 11.65 g/t Au (CL0004)
31 m at 1.29 g/t Au from 60 m, including 3 m at 6.52 g/t Au (CL0002)
Shallow cover is present in the southern part of the field, with ~10 km of mineralised trend unexplored north and south of the immediate Clone area.
Novo is planning to conduct detailed structural work, broad scale geological and regolith mapping, surface soil and rock chip geochemical sampling in the main target areas prior to a 2,000 m RC drill program in H1 2025.
Commenting on the acquisitions, Mike Spreadborough, Executive Co-Chairman and Acting Chief Executive Officer, said: "Novo is pleased to complete option agreements on the John Bull Gold Project with TechGen Metals and the Tibooburra Gold Project with Manhattan Corporation. Both Projects are drill-ready, high-grade gold opportunities, located in excellent mining jurisdictions and most importantly, meet the specific project criteria required by our standout geological team to identifystandalone gold projects with > 1 Moz development potential.
"High-grade gold projects are rare, and both the John Bull and Tibooburra Gold Projects have reported previous high-grade results. We are looking forward to getting on the ground early in 2025 and commencing both exploration programs. Importantly, the John Bull and Tibooburra Gold Projectscompliment Novo's existing high-quality Pilbara, Western Australia and Victoria exploration portfolio and following the recent sale of our partial investment on San Cristobal Mining for A$11.5 million, we are well-funded to continue our strong exploration push in 2025."
A PDF of this release including all associated figures is available at: http://ml.globenewswire.com/Resource/Download/31d0e229-1b9a-481d-a7b2-3b5f7e06a77c
VANCOUVER, British Columbia, Dec. 13, 2024 -- Novo Resources Corp. (Novo or the Company) (ASX: NVO) (TSX: NVO) (OTCQX: NSRPF) is pleased to announce that it has entered into binding term sheets for two option agreements, one with TechGen Metals Limited (ASX: TG1) (TechGen) at their John Bull Gold Project (John Bull) and a second with Manhattan Corporation Limited (ASX: MHC) (Manhattan) at their Tibooburra Gold Project (Tibooburra) with both projects located in New South Wales (NSW), Australia.
These projects support Novo's strategy of identifying 'drill ready' exploration targets with a demonstrated pathway with potential to be a standalone project with > 1 Moz development potential.
Both Projects also satisfy Novo's key sustainability criteria for potential future development.
In addition to Novo's current Pilbara exploration portfolio and recently announced Onslow District landholding consolidation to form the Toolunga Project in Western Australia (WA), the John Bull and Tibooburra Gold Projects will strengthen Novo's exploration portfolio and provide targeted exploration drill programs throughout 2025.
ABOUT NOVO
Novo is an Australian based gold explorer listed on the ASX and the TSX focused on discovering standalone gold projects with > 1 Moz development potential. Novo is an innovative gold explorer with a significant land package covering approximately 5,500 square kilometres in the Pilbara region of Western Australia, along with the 22 square kilometre Belltopper project in the Bendigo Tectonic Zone of Victoria, Australia.
Novo's key project area in the Pilbara is the Egina Gold Camp, where De Grey Mining is farming-in to form a JV at the Becher Project and surrounding tenements through exploration expenditure of A$25 million within 4 years for a 50% interest. The Becher Project has similar geological characteristics as De Grey's 12.7 Moz Hemi Project*. Novo is also advancing gold exploration south of Becher in the Egina Gold Camp, part of the Croydon JV (Novo 70%: Creasy Group 30%). Novo continues to undertake early-stage exploration elsewhere across its Pilbara tenement portfolio.
Novo has also formed a lithium joint venture with SQM in the Pilbara which provides shareholder exposure to battery metals.
*Refer to De Grey ASX Announcement, Hemi Gold Project Resource Update, dated 21 November 2023 No assurance can be given that a similar (or any) commercially viable mineral deposit will be determined at Novo's Becher Project and that all material assumptions and technical parameters underpinning the estimates in the original market announcement continue to apply and have not materially changed.
JOHN BULL GOLD PROJECT
Location and Tenure
John Bull is located in the New England Orogen of NSW. The tenure consists of two tenements and covers some 32 sq km (Figure 2, Table 1).
Table1John Bull Gold Project tenement details
Tenement Number
Grant Date
Expiry Date
Number of Blocks
Area sq km
Holder
EL 8389
03/09/2015
03/09/2028
1
3
TechGen NSW Pty Ltd
EL 9121
01/04/2021
01/04/2027
11
29
TechGen NSW Pty Ltd
Geology and Mineralisation
Mineralisation at John Bull is interpreted to be part of a reduced IRG system. It is characterised by abundant sheeted and stockwork veins with associated sulphides and is hosted within Carboniferous sediments and felsic intrusions (Figure 3). The mineralisation lies within the thermal aureole of a large northeast-trending Triassic I-type granite, which is of the same age as the Timbarra Gold Mine.
Gold mineralisation in the form of sheeted, low-sulphide quartz veins trend NNE and ENE and dip 40 to 60 degrees to the ESE in a 250 m wide corridor, crosscutting bedding. Mineralisation includes native gold in a low sulphide system with pyrrhotite and arsenopyrite and minor magnetite.
Previous Exploration
Historic
Gold discovered in 1872 was worked from at least three shafts up to 20 m deep8. Subsequent and extensive hydraulic sluicing of elluvial material of three areas was conducted. The main area of sluicing has exposed numerous sheeted quartz veins in the south of the project area and was the target of drilling conducted by TechGen in 2022 / 2023.
Kennecott / Southern Goldfields Trenching and Sampling
Between 1983 and 1985, Kennecott / Southern Goldfields completed a 220 m long costean dug by a backhoe, which has since been infilled and rehabilitated. The trench was excavated perpendicular to veins and cut through the main exposed vein arrays in Sluice Area 1 resulting in an intersection of 160 m @ 1.2 g/t Au (Figure 4) from 5 m composite samples (no top cut applied), and including higher grades such as 5 m @ 18.0 g/t Au and 5 m @ 7.1 g/t Au9. Assaying included screen fire assay on twelve samples, which show the presence of coarse gold. The project may significantly benefit from alternate modern assay techniques such as 500 g or multipot Chrysos PhotonAssay™ analysis to better quantify this coarse gold component.
Sample results may not be representative of mineralisation in the district. No assurance can be given that Novo will achieve similar results as part of its exploration activities.
TechGen Geochemical Sampling
More recently, TechGen defined a significant, high-order surface geochemical gold anomaly over 900 m strike and 250 m width at > 100 ppb Au (Figure 4), with seven soil samples > 4.5 g/t Au and a peak assay of 10.0 g/t Au10. The soil anomaly remains open along strike to the north. A second smaller anomaly occurs in the south, with the entire system thus far defined over 1.3 km strike. TechGen completed 743 samples at 50 m x 50 m and locally down to 25 m x 25 m resulting in assays with 47 samples > 1 g/t Au. Refer to Appendix 2 for all results > 100 ppb Au soil samples.
The Micks Bull tenement, immediately west of John Bull has limited stream sediment sampling and requires immediate follow-up and first pass exploration.
Geophysics
Induced Polarisation electrical geophysics (IP) was conducted on 3 lines over the southern part of the target, delineating significant chargability anomalies over known mineralisation11, as well as four chargability anomalies that are not yet drill tested (Figure 5).
Drilling
Seventeen RC drill holes for 2,249.5 m were completed in 2 phases by TechGen in 2022 and 2023, with the deepest hole being 146.5 m (effectively tested to 120 m below surface). Drilling tested only 320 m strike with mineralisation open on all sections and to the north and south. Best results are:
94 m @ 0.95 g/t Au from 4 m, including 66 m @ 1.14 g/t Au and 17 m @ 1.08 g/t Au (JBRC0006)12
68 m @ 1.0 g/t Au from surface, including 23 m @ 2.02 g/t Au (JBRC0001) also including higher grade zones of 7 m @ 3.10 g/t Au from 55 m and 4 m @ 4.58 g/t Au from 39m13
22 m @ 1.07 g/t Au from 60 m (JBRC00016)14
Full results for significant intercepts previously released are presented in Appendix 1.
ESG Criteria
Novo has an ongoing commitment to operating in a safe, responsible and environmentally sustainable manner. Novo carries out exploration activities mindful that it has a responsibility to manage the land on which it operates to ensure it minimises its impacts. Novo develops and implements Environmental Management Plans specific to the regions in which it operates.
Novo is committed to developing strong relationships with all its stakeholders. This is achieved through open and honest communications.
Heritage and Native Title
The TechGen tenements fall within the Grafton-Ngerrie Local Aboriginal Council. There are no Native Title Determinations or active Claims over the tenements. This area will be monitored for the lodgment of a new claim. If a claim is lodged, consultation will occur with the new representative body/traditional owners to ensure informed consent for exploration in the area.
Forward Programs
Novo intends to conduct the following exploration activities John Bull in H1 2025:
Detailed 1:500 scale to 1:2,000 scale mapping, focussing on lithological and structural controls on mineralisation at John Bull.
Extend the soil sample grids to the north and south of current coverage, and infill to 25 m x 25 m spaced soil sampling where current coverage is 50 m x 50 m.
pXRF multielement analysis of soil samples in addition to laboratory assayed gold.
Complete multi-element assaying of remaining drilling residue where this was not previously conducted.
> 2,000 m of drilling, including > 500 m of diamond drilling in H1 2025. Drilling will be aimed at testing down dip and along strike of current open intercepts, testing targets north and south of current drilling and testing structural - lithological intersections once defined by new detailed mapping.
Work to be conducted on the western Micks Bull tenement includes additional stream sediment sampling to achieve full coverage, ridge and spur rock chip sampling, gridded soil sampling, and mapping.
Material John Bull Option Terms
The key terms of the binding term sheets with TechGen Metals Limited, TechGen NSW Pty Ltd (TechGen NSW) and Andrew Sloot (Sloot) regarding the John Bull project are set out below:
On signing of the definitive agreement, Novo will reimburse TechGen NSW A$300,000 worth of Novo shares at market value for expenditure incurred to date, which shares will be subject to a four-month hold period pursuant to Canadian securities laws.
Novo is required to complete 1,500 m of drilling in the first earn in period of 12 months.
Following that initial period, if Novo chooses to continue, it will pay TechGen NSW, A$200,000 worth of Novo shares at market value for a second farm in period of 12 months, which shares will be subject to a four-month hold period pursuant to Canadian securities laws.
Novo is required to complete an additional 1,500 m of drilling in the second earn in period of 12 months.
At completion of the second farm-in period, Novo has the option to terminate the agreement or exercise the option and form an 80/20 unincorporated joint venture with TechGen NSW on EL9121, (Micks Bull) in which TechGen is free carried until a decision is made to commence commercial mining operations. If the option is exercised, Novo will obtain an 80% interest in the tenements. Also, at completion of the second farm-in period, Novo has the option to form a 70/20/10 unincorporated joint venture with TechGen NSW and Sloot on EL8389 (John Bull) in which both TechGen NSW and Sloot are free carried until a decision is made to commence commercial mining operations. If this option is exercised, Novo will obtain a 70% interest in the tenement.
TechGen NSW signed a binding term sheet with Black Dragon Energy (AUS) Pty Ltd (a wholly owned subsidiary of Zenith Minerals Ltd.) on 16 May 2022, through which TechGen acquired legal and beneficial interest in the tenements comprising the John Bull Gold Project.
TIBOOBURRA GOLD PROJECT
Location and Tenure
Tibooburra is located in the northwest of NSW, Australia approximately 280 km north of the Broken Hill Pb-Zn-Ag mine and includes six granted exploration licences over ~ 630 sq km (Figure 7).
The tenure consists of five tenements within and along strike of the Albert Goldfields and one tenement (EL 9094) situated further west, covering a large magnetic high with co-incident gravity low (Table 2). Tenure is held by Awati Resources Pty Ltd, a wholly owned subsidiary of Manhattan.
Table2Tibooburra Gold Project tenement details
Tenement Number
Grant Date
Expiry Date
Number of Blocks
Area sq km
Holder
EL 7437
23/12/2009
23/12/2026
11
33
Awati Resources Pty Ltd
EL 8688
02/02/2018
02/02/2027
37
110
Awati Resources Pty Ltd
EL 8691
02/02/2018
02/02/2027
46
137
Awati Resources Pty Ltd
EL 9092
15/03/2021
15/03/2027
40
119
Awati Resources Pty Ltd
EL 9094
16/03/2021
16/03/2027
53
158
Awati Resources Pty Ltd
EL 9202
28/06/2021
28/06/2027
25
74
Awati Resources Pty Ltd
Geology and Mineralisation
Tibooburra covers ~55 km of strike along the Tibooburra and Koonenberry Greenstone Belts in northwestern NSW. The Albert Goldfields is an historical field located in the north of the project area, discovered in 1881 and mined in earnest until 1901 with a recorded production of approximately 55,000 oz Au at mining grades of +20 g/t Au2.
The Albert Goldfields lies on a unique district-scale jog at the boundary of the Thomson and Delamarian orogens, with stratigraphy wrapping around the Tibooburra granite intrusive complex to the northeast (Figure 8). Mineralisation is described as narrow high-grade (to super high-grade) quartz veins hosted in the folded and faulted Cambrian sedimentary host rocks, and broadly falls under the classification of turbidite-hosted/slate-belt gold.
The Project area itself displays more than 200 historic workings and over 34 km of mineralised trend on multiple lines of workings (Figure 9). Several immediate targets have been delineated by previous workers including New Bendigo, Clone, Pioneer, Elizabeth Reef and Good Friday. However, outside the New Bendigo prospect little systematic modern exploration has been conducted. The area is significantly under-explored, and satellite imagery and interpretation (Figure 9) shows abundant cover including:
North and south of New Bendigo;
South of Clone, the trend is essentially under cover for >10 km; and
Regionally, south of the kink there is 60 km strike with no outcrop.
Two advanced drill ready target areas are defined at New Bendigo and Clone (and the associated Clone Trend).
Previous Exploration
Overview
Manhattan entered into an agreement to acquire the Tibooburra Project from Awati Resources Limited in late 201916. Since then, Manhattan has drilled several aircore (AC) traverses, and targeted RC and diamond drilling, with particular focus around the New Bendigo Target. A short RC drill program was completed in 2023 at Clone. Manhattan's exploration programs were disrupted in 2020 due COVID and border closures, delaying many programs.
Prior to Manhattan, work across the licence area included soil, stream and rock chip sampling programs, broad RAB and AC drilling traverses, regional geophysics (magnetics and gravity), RC and limited diamond drilling.
Historical exploration results contained in the Reports lodged by the other companies referred to in this news release have not been reported in accordance with the JORC Code 2012 or NI 43-101 and a Competent Person/Qualified Person has not done sufficient work to disclose the exploration results in accordance with the JORC Code 2012 or NI 43-101. It is possible that following further evaluation and/or exploration work that the confidence in the prior reported exploration results may be reduced when reported under the JORC Code 2012 or NI 43-101. Novo confirms that nothing has come to its attention that causes it to question the accuracy or reliability of the results included in the WAMEX Reports, but Novo has not independently validated those results and therefore is not to be regarded as reporting, adopting or endorsing those results.
New Bendigo Prospect
The prospect shows extensive historical workings at surface over 2 km strike. Several historical drill programs, including RC and diamond drilling by Manhattan in 2020-2022 testing over 530 m strike intersected multiple high order gold results. Extremely high-grade gold has been observed, hosted in laminated quartz veins in historical diamond drilling (Figure 10).
Peak results from Manhattan drilling include17:
30 m at 4.03 g/t Au from 11 m, including 5 m at 20.86 g/t Au (NB0033)
16 m at 13.89 g/t Au from 1 m, including 3 m at 69.20 g/t Au (NB0083)
8 m at 40.5 g/t Au from 70 m, including 3 m at 105.34 g/t Au (NB0089)
7 m at 13.10 g/t Au from 97 m, including 5 m at 18.01 g/t Au (NB0113)
13 m at 6.16 g/t Au from 50 m, including 3 m at 25.48 g/t Au (NB0122)
24 m @ 3.55 g/t Au from 82 m including 4 m @ 20.11 g/t Au (NBD005 - Figure 10)
Refer to Appendix 5 and Appendix 6 for a list of all significant intercepts for New Bendigo diamond and RC drilling results.
The prospect provides an opportunity for high-grade resource development once geological controls and continuity are resolved. Potential for repeated lodes at depth and along an interpreted shallow plunge is also good. Substantial drill step outs down dip and down plunge will be required to test for blind mineralisation and stacked lodes.
Sample results may not be representative of mineralisation in the district. No assurance can be given that Novo will achieve similar results as part of its exploration activities.
Cautionary Statement: Visual estimates of mineral abundance should never be considered a proxy or substitute for laboratory analyses where concentrations or grades are the factor of principal economic interest. Visual estimates also potentially provide no information regarding impurities or deleterious physical properties relevant to valuations.
Clone Prospect
The Clone prospect is characterised by numerous historical workings over a ~ 450 m strike length, to depths of up to 25 m. Multiple parallel mineralised trends are targeted, with the densest population of historic workings occurring over a zone locally up to 130 m wide.
The Clone prospect occupies the middle of an approximately 10 km section of largely unexplored ground along a prospective northwest-trending fault corridor that stretches from the New Bendigo Prospect to the southeast; and the Pioneer Prospect to the northwest.
Peak drill results from 11 RC holes drilled in 2023 over 250 m strike to a maximum depth below surface of 75 m, include19:
7 m at 7.23 g/t Au from 81 m, including 3 m at 16.1 g/t Au (CL0007)
9 m at 6.03 g/t Au from 16 m (CL0010)
6 m at 4.22 g/t Au from 66 m, including 2 m at 11.65 g/t Au (CL0004)
31 m at 1.29 g/t Au from 60 m, including 3 m at 6.52 g/t Au (CL0002)
Mineralisation at Clone remains open in all directions, with targeted mineralised basement trending under cover sediments to the south. The cover sediments extending for some 15 km and providing opportunities for exploration targeting potential 'blind discoveries.'
Sample results may not be representative of mineralisation in the district. No assurance can be given that Novo will achieve similar results as part of its exploration activities.
A full list of significant intercepts for Clone 2022 RC drilling is listed in Appendix 4.
Cautionary Statement: Visual estimates of mineral abundance should never be considered a proxy or substitute for laboratory analyses where concentrations or grades are the factor of principal economic interest. Visual estimates also potentially provide no information regarding impurities or deleterious physical properties relevant to valuations.
ESG Criteria
Novo has an ongoing commitment to operating in a safe, responsible and environmentally sustainable manner. Novo carries out exploration activities mindful that it has a responsibility to manage the land on which it operates to ensure it minimises its impacts. Novo develops and implements Environmental Management Plans specific to the regions in which it operates.
Novo is committed to developing strong relationships with all its stakeholders. This is achieved through open and honest communications.
Heritage and Native Title
The Tibooburra tenement package is covered by two separate Native Title Claims; the Malyangapa Combined Proceedings (NC2022/0002) and the Wongkumara People (QC2008/003). The region is administered by the Tibooburra LALC based in Tibooburra. Novo will continue to monitor the process and liaise with the traditional owners.
Forward Programs
Novo intends to conduct the following exploration activities in 2025:
Detailed 1:500 scale to 1:2,000 scale mapping including rock chip and channel sampling, focussing on lithological and structural controls on mineralisation at Clone, New Bendigo and Phoenix / Pioneer.
Grid soil sampling along the Clone trend, plus pXRF multielement analysis, plus infill and extensional soil grids along the Pioneer and New Bendigo trends.
Stage 1 > 2,000 m of RC drilling in H1 2025, to test the high-grade mineralisation at Clone at depth, along strike and down plunge.
Aircore drilling on broad spaced lines along strike of the Clone to test up to 10 km of mineralised trend under cover.
Relogging and re-sampling diamond drill intercepts, plus pXRF multielement analysis of drill pulps where available prior to drill testing the down plunge extension of New Bendigo.
Material Tibooburra Option Terms
The key terms of the binding term sheet with Manhattan Corporation Limited and Awati Resources Pty Ltd (Awati) regarding the Tibooburra Project are set out below:
On signing of the agreement, Novo will reimburse Awati 500,000 Novo shares at market value for expenditure incurred to date, which shares will be subject to a four-month hold period pursuant to Canadian securities laws.
Novo is required to spend A$500,000 (approximately C$450,000) in the first earn in period of 12 months.
Following that initial period, if Novo chooses to continue, it will pay Awati, 1,000,000 Novo shares at market value for a second farm in period of 12 months, which shares will be subject to a four-month hold period pursuant to Canadian securities laws.
Novo is required to spend A$1,000,000 (approximately C$900,000) in the second earn in period of 12 months.
At completion of the second farm-in period, Novo has the option to terminate the agreement or exercise the option and form a 70/30 unincorporated joint venture with Awati, in which Awati is free carried until the completion of a positive definitive feasibility study. If the option is exercised, Novo will obtain a 70% interest in the tenements.
Authorised for release by the Board of Directors.
CONTACT
Investors: Mike Spreadborough +61 8 6400 6100 info@novoresources.com
North American Queries: Leo Karabelas +1 416 543 3120 leo@novoresources.com
Mrs Karen (Kas) De Luca (MAIG), is the qualified person, as defined under National Instrument 43-101 Standards of Disclosure for Mineral Projects, responsible for, and having reviewed and approved, the technical information contained in this news release. Mrs De Luca is Novo's General Manager Exploration.
JORC COMPLIANCE STATEMENTS
The information in this news release that relates to exploration results at the John Bull Gold Project and the Tibooburra Gold Project is based on information compiled by Mrs De Luca, who is a full-time employee of Novo Resources Corp. Mrs De Luca is a Competent Person who is a member of the Australian Institute of Geoscientists. Mrs De Luca has sufficient experience that is relevant to the style of mineralisation and the type of deposits under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves'. Mrs De Luca consents to the inclusion in the report of the matters based on her information in the form and context in which it appears.
The Company confirms that it is not aware of any new information that materially affects the information included in the original market announcement and that all material assumptions and technical parameters underpinning the estimates in the relevant market announcement continue to apply and have not materially changed. The Company confirms that the form and context in which the Competent Person's findings are presented have not been materially modified from the original market announcement.
FORWARD-LOOKING STATEMENTS
Some statements in this news release may contain "forward-looking statements" within the meaning of Canadian and Australian securities law and regulations. In this news release, such statements include but are not limited to planned exploration activities and the timing of such. These statements address future events and conditions and, as such, involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the statements. Such factors include, without limitation, customary risks of the resource industry and the risk factors identified in Novo's annual information form for the year ended December 31, 2023 (which is available under Novo's profile on SEDAR+ at www.sedarplus.ca and at www.asx.com.au) in the Company's prospectus dated 2 August 2023 which is available at www.asx.com.au. Forward-looking statements speak only as of the date those statements are made. Except as required by applicable law, Novo assumes no obligation to update or to publicly announce the results of any change to any forward-looking statement contained or incorporated by reference herein to reflect actual results, future events or developments, changes in assumptions or changes in other factors affecting the forward-looking statements. If Novo updates any forward-looking statement(s), no inference should be drawn that the Company will make additional updates with respect to those or other forward-looking statements.
_______________ 1 Refer to ASX news release by Zenith Minerals Ltd dated 10/09/2020 - New Gold Project Secured in NSW 2 Refer to ASX news release by TechGen Metals Limited dated 12/04/2023 - New Outstanding High-grade Gold Soil Results at John Bull (Main Soil Anomaly Now +900m long) 3 Refer to ASX news release by TechGen Metals Limited dated 12/09/2022 - Gold Discovery Confirmed John Bull Gold Project 4 Refer to ASX news release by TechGen Metals Limited dated 01/09/2022 - Maiden Drill Hole Returns 23 metres at 2.02 g/t Gold, John Bull Project, NSW 5 Refer to ASX news release by Zenith Minerals Ltd dated 10/09/2020 - New Gold Project Secured in NSW 6 Refer to ASX news release by Manhattan Corp dated 10/07/2023 - New High-Grade Gold Discovery 7 Refer to ASX news release by Manhattan Corp dated 10/07/2023 - New High-Grade Gold Discovery 8 Refer to ASX news release by Zenith Minerals Ltd dated 10/09/2020 - New Gold Project Secured in NSW 9 Refer to ASX news release by Zenith Minerals Ltd dated 10/09/2020 - New Gold Project Secured in NSW 10 Refer to ASX news release by TechGen Metals Limited dated 12/04/2023 - New Outstanding High-grade Gold Soil Results at John Bull (Main Soil Anomaly Now +900m long) 11 Refer to ASX news release by Zenith Minerals Ltd dated 10/09/2020 - New Gold Project Secured in NSW 12 Refer to ASX news release by TechGen Metals Limited dated 12/09/2022 - Gold Discovery Confirmed John Bull Gold Project 13 Refer to ASX news release by TechGen Metals Limited dated 01/09/2022 - Maiden Drill Hole Returns 23 metres at 2.02 g/t Gold, John Bull Project, NSW 14 Refer to ASX news release by TechGen Metals Limited dated 7/09/2023 - Stage 2 RC Drilling Results Confirm Large Scale Gold System, John Bull Gold Project 15 Refer to ASX news release by TechGen Metals Limited dated 12/09/2022 - Gold Discovery Confirmed John Bull Gold Project 16 Refer to ASX news release by Manhattan Corp dated 02/12/2019 - Manhattan to Acquire New High-Grade Gold Project in NSW 17 Refer to ASX news release by Manhattan Corp dated 10/07/2023 - New High-Grade Gold Discovery 18 Refer to ASX news release by Manhattan Corp dated 27/10/2022 - Quarterly Activities Report September 2022 19 Refer to ASX news release by Manhattan Corp dated 10/07/2023 - New High-Grade Gold Discovery
ABOUT NOVO
Novo is an Australian based gold explorer listed on the ASX and the TSX focused on discovering standalone gold projects with > 1 Moz development potential. Novo is an innovative gold explorer with a significant land package covering approximately 5,500 square kilometres in the Pilbara region of Western Australia, along with the 22 square kilometre Belltopper project in the Bendigo Tectonic Zone of Victoria, Australia.
Novo's key project area in the Pilbara is the Egina Gold Camp, where De Grey Mining is farming-in to form a JV at the Becher Project and surrounding tenements through exploration expenditure of A$25 million within 4 years for a 50% interest. The Becher Project has similar geological characteristics as De Grey's 12.7 Moz Hemi Project*. Novo is also advancing gold exploration south of Becher in the Egina Gold Camp, part of the Croydon JV (Novo 70%: Creasy Group 30%). Novo continues to undertake early-stage exploration elsewhere across its Pilbara tenement portfolio.
Novo has also formed a lithium joint venture with SQM in the Pilbara which provides shareholder exposure to battery metals.
Novo has recently strengthened its high-quality, Australian based exploration portfolio by adding the TechGen John Bull Gold Project in the New England Orogen of NSW, and Manhattan Tibooburra Gold Project in the Albert Goldfields in northwestern NSW. Both projects demonstrate prospectivity for significant discovery and resource definition and align with Novo's strategy of identifying and exploring projects with > 1 Moz Au potential. These high-grade gold projects compliment the landholding consolidation that forms the Toolunga Project in the Onslow District in Western Australia.
Novo has a significant investment portfolio and a disciplined program in place to identify value accretive opportunities that will build further value for shareholders.
Please refer to Novo's website for further information including the latest Corporate Presentation.
An Exploration Target as defined in the JORC Code (2012) is a statement or estimate of the exploration potential of a mineral deposit in a defined geological setting where the statement or estimate, quoted as a range of tonnes and a range of grade (or quality), relates to mineralisation for which there has been insufficient exploration to estimate a Mineral Resource. Accordingly, these figures are not Mineral Resource or Ore Reserve estimates as defined in the JORC Code (2012). The potential quantities and grades referred to above are conceptual in nature and there has been insufficient exploration to estimate a Mineral Resource and it is uncertain if further exploration will result in the estimation of a Mineral Resource. These figures are based on the interpreted continuity of mineralisation and projection into unexplored ground often around historical workings. The Exploration Target has been prepared in accordance with the JORC Code (2012). as detailed in the Company's ASX announcement released on 25 September 2024 (available to view at www.asx.com.au). The Tonnage range for the exploration target is 1.5Mt to 2.1Mt and the Grade range is 6.6g/t Au to 8.4g/t Au. The Company confirms that it is not aware of any new information that material affects the information included in the original market announcement and that all material assumptions and technical parameters underpinning the estimates in the original market announcement continue to apply and have not materially changed. The Company confirms that the form and context in which the Competent Person's findings are presented have not been materially modified from the original market announcement.
*Refer to De Grey ASX Announcement, Hemi Gold Project Resource Update, dated 21 November 2023 No assurance can be given that a similar (or any) commercially viable mineral deposit will be determined at Novo's Becher Project.nt and that all material assumptions and technical parameters underpinning the estimates in the original market announcement continue to apply and have not materially changed.
Appendix 1 - Significant Intercepts reported by TechGen 202220/ 202321A >0.5 g/t Au cut off was used for the calculations, with a maximum of 4 m internal dilution applied for JBRC007 - JBRC007, and 3 m internal dilution for JBRC008 - JBRC017. All intervals averaging > 1 g/t Au are tabulated. Locations are in GDA94, zone 56
Hole ID
Easting (m)
Northing (m)
Dip
Azimuth
Depth (m)
From (m)
To (m)
Intercept (g/t Au)
JBRC001
447,560
6,733,518
-60
259
133
0
68
68 m @ 1.00
JBRC001
including
39
62
23 m @ 2.02
JBRC001
Or….
39
43
4 m @ 4.58*
JBRC001
Or….
55
62
7 m @ 3.10*
JBRC001
76
77
1 m @ 1.02
JBRC002
447,440
6,733,559
-60
259
120
12
13
1 m @ 1.46
JBRC003
447,490
6,733,548
-60
280
100
4
11
7 m @ 1.02
JBRC004
447,550
6,733,554
-60
249
103
3
8
5 m @ 1.00
JBRC004
34
45
1 1 m @ 1.07
JBRC004
including
37
38
1 m @ 5.31
JBRC005
447,600
6,733,515
-60
265
139
12
19
7 m @ 1.65
JBRC005
including
15
16
1 m @ 5.26
JBRC005
27
32
5 m @ 1.03
JBRC005
46
47
1 m @ 1.15
JBRC005
57
70
13 m @ 1.02
JBRC005
including
57
58
1 m @ 5.90
JBRC005
77
79
2 m @ 6.66
JBRC005
including
77
78
1 m @ 10.00
JBRC005
95
118
23 m @ 1.10
JBRC005
including
97
98
1 m @ 8.22
JBRC006
447,630
6,733,524
-60
259
145
4
98
94 m @ 0.95
JBRC006
including
32
98
66 m @ 1.14
JBRC006
109
126
17 m @ 1.08
JBRC007
447,708
6,733,512
-60
259
147
104
108
4 m @ 1.29
JBRC008
447,632
6,733,658
-60
259
139
63
64
1 m @ 1.01
JBRC008
99
100
1 m @ 1.35
JBRC008
127
128
1 m @ 1.38
JBRC009
447,588
6,733,639
-60
259
138
56
57
1 m @ 1.55
JBRC009
76
77
1 m @ 1.79
JBRC009
86
87
1 m @ 1.06
JBRC009
110
111
1 m @ 1.11
JBRC009
117
118
1 m @ 1.78
JBRC009
120
127
7 m @ 1.12
JBRC010
447,550
6,733,642
-60
259
144
10
11
1 m @ 1.59
JBRC010
28
29
1 m @ 1.50
JBRC010
74
75
1 m @ 9.67
JBRC010
79
86
7 m @ 1.20
JBRC010
90
91
1 m @ 1.65
JBRC010
95
96
1 m @ 1.08
JBRC010
98
99
1 m @ 1.08
JBRC010
102
103
1 m @ 1.15
JBRC010
124
125
1 m @ 1.29
JBRC011
447,471
6,733,653
-60
259
120
4
8
4 m @ 1.09
JBRC011
9
10
1 m @ 1.32
JBRC011
15
18
3 m @ 1.46
JBRC011
22
23
1 m @ 1.08
JBRC011
55
64
9 m @ 1.86
JBRC011
83
84
1 m @ 2.28
JBRC012
447,642
6,733,748
-60
259
138
50
52
2 m @ 1.58
JBRC012
62
63
1 m @ 1.68
JBRC012
89
90
1 m @ 1.98
JBRC012
115
116
1 m @ 1.70
JBRC012
120
122
2 m @ 3.29
JBRC012
126
129
3 m @ 1.04
JBRC013
447,574
6,733,751
-60
259
138
50
51
1 m @ 1.04
JBRC013
55
56
1 m @ 1.53
JBRC013
64
65
1 m @ 1.68
JBRC013
67
68
1 m @ 1.56
JBRC013
97
102
5 m @ 1.33
JBRC013
107
113
6 m @ 1.18
JBRC013
116
117
1 m @ 1.37
JBRC014
447,516
6,733,750
-60
259
138
35
36
1 m @ 1.28
JBRC014
37
39
2 m @ 1.14
JBRC014
51
53
2 m @ 1.45
JBRC014
64
66
2 m @ 1.18
JBRC014
67
68
1 m @ 1.21
JBRC014
71
73
2 m @ 1.13
JBRC014
75
76
1 m @ 1.19
JBRC014
137
138
1 m @ 1.02
JBRC015
447,466
6,733,741
-60
259
126
1
3
2 m @ 1.36
JBRC015
34
36
2 m @ 4.15
JBRC015
45
46
1 m @ 6.38
JBRC016
447,533
6,733,447
-60
259
138
11
13
2 m @ 1.00
JBRC016
18
19
1 m @ 3.39
JBRC016
30
31
1 m @ 3.10
JBRC016
34
36
2 m @ 1.13
JBRC016
47
56
9 m @ 1.82
JBRC016
including
48
49
1 m @ 9.21
JBRC016
60
82
22 m @ 1.07
JBRC016
88
90
2 m @ 1.75
JBRC016
109
116
7 m @ 1.06
JBRC017
447,479
6,733,439
-60
259
144
3
4
1 m @ 1.14
JBRC017
7
8
1 m @ 1.68
JBRC017
15
19
4 m @ 1.34
JBRC017
27
28
1 m @ 1.68
JBRC017
34
35
1 m @ 1.25
JBRC017
42
43
1 m @ 1.02
JBRC017
44
46
2 m @ 1.38
*Alternative increased grade cut off selected by TechGen for reporting of higher-grade components.
Appendix 2 - Soil Sample Table of Results > 100 ppb Au GDA94 z56 (TechGen 2022 and 2023)
Sample ID
Year
Easting (m)
Northing (m)
Au g/t
322759
2023
447,600
6,734,050
10.00
323169
2022
447,525
6,733,625
8.56
323239
2022
447,600
6,733,550
7.56
323279
2022
447,500
6,733,500
7.35
323190
2022
447,475
6,733,600
7.11
322928
2022
447,400
6,733,325
4.77
323256
2022
447,500
6,733,525
4.63
323237
2022
447,550
6,733,550
2.91
322972
2022
447,400
6,733,275
2.69
323099
2022
447,400
6,733,700
2.64
323065
2022
447,650
6,733,750
2.61
322978
2022
447,550
6,733,275
2.54
323217
2022
447,625
6,733,575
2.52
322623
2022
447,375
6,733,075
2.10
323036
2022
447,500
6,733,775
2.09
322513
2022
447,475
6,733,225
1.93
323298
2022
447,450
6,733,475
1.90
322907
2022
447,400
6,733,350
1.67
323172
2022
447,600
6,733,625
1.65
323232
2022
447,425
6,733,550
1.65
323259
2022
447,575
6,733,525
1.65
323212
2022
447,500
6,733,575
1.65
323126
2022
447,550
6,733,675
1.56
322511
2022
447,425
6,733,225
1.54
323058
2022
447,475
6,733,750
1.50
322533
2022
447,500
6,733,200
1.47
323102
2022
447,475
6,733,700
1.45
323037
2022
447,525
6,733,775
1.42
323080
2022
447,500
6,733,725
1.30
323276
2022
447,425
6,733,500
1.28
322693
2023
447,550
6,734,350
1.28
322547
2022
447,375
6,733,175
1.21
322802
2022
447,550
6,733,475
1.21
323016
2022
447,525
6,733,800
1.17
322760
2023
447,600
6,734,100
1.16
323193
2022
447,550
6,733,600
1.11
323014
2022
447,475
6,733,800
1.09
322549
2022
447,425
6,733,175
1.09
322763
2023
447,650
6,734,200
1.08
322971
2022
447,375
6,733,275
1.08
323019
2022
447,600
6,733,800
1.07
322573
2022
447,550
6,733,150
1.03
323018
2022
447,575
6,733,800
1.02
323035
2022
447,475
6,733,775
1.01
322927
2022
447,375
6,733,325
1.01
323123
2022
447,475
6,733,675
1.01
323242
2022
447,675
6,733,550
1.01
322862
2022
447,375
6,733,400
0.99
322512
2022
447,450
6,733,225
0.99
322990
2022
447,375
6,733,250
0.90
323121
2022
447,425
6,733,675
0.90
323236
2022
447,525
6,733,550
0.86
322866
2022
447,475
6,733,400
0.84
322728
2023
447,500
6,734,100
0.83
323074
2022
447,350
6,733,725
0.82
322750
2023
447,550
6,733,900
0.78
322754
2023
447,600
6,733,850
0.76
322888
2022
447,500
6,733,375
0.74
323192
2022
447,525
6,733,600
0.73
323029
2022
447,325
6,733,775
0.71
322906
2022
447,375
6,733,350
0.70
323146
2022
447,475
6,733,650
0.68
322568
2022
447,425
6,733,150
0.67
322747
2023
447,500
6,733,900
0.67
322803
2022
447,575
6,733,475
0.66
323231
2022
447,400
6,733,550
0.66
322758
2023
447,600
6,734,000
0.66
322550
2022
447,450
6,733,175
0.65
322564
2022
447,325
6,733,150
0.65
322950
2022
447,375
6,733,300
0.64
322975
2022
447,475
6,733,275
0.61
323261
2022
447,625
6,733,525
0.58
323278
2022
447,475
6,733,500
0.57
323258
2022
447,550
6,733,525
0.56
322721
2023
447,450
6,733,950
0.56
322592
2022
447,550
6,733,125
0.55
323030
2022
447,350
6,733,775
0.54
322753
2023
447,600
6,733,900
0.54
322510
2022
447,400
6,733,225
0.53
323077
2022
447,425
6,733,725
0.53
322974
2022
447,450
6,733,275
0.53
322748
2023
447,500
6,733,850
0.52
323103
2022
447,500
6,733,700
0.52
323147
2022
447,500
6,733,650
0.51
322904
2022
447,325
6,733,350
0.50
323216
2022
447,600
6,733,575
0.49
323297
2022
447,425
6,733,475
0.49
323280
2022
447,525
6,733,500
0.48
322780
2023
447,700
6,733,850
0.48
322767
2023
447,650
6,734,000
0.48
323081
2022
447,525
6,733,725
0.48
323122
2022
447,450
6,733,675
0.45
323124
2022
447,500
6,733,675
0.45
322772
2023
447,750
6,734,200
0.44
323101
2022
447,450
6,733,700
0.44
322744
2023
447,550
6,734,050
0.43
322988
2022
447,325
6,733,250
0.43
322643
2022
447,400
6,733,050
0.43
322660
2023
447,700
6,734,100
0.43
322873
2022
447,650
6,733,400
0.43
323194
2022
447,575
6,733,600
0.43
322751
2023
447,550
6,733,950
0.42
323173
2022
447,625
6,733,625
0.42
322685
2023
447,700
6,734,250
0.41
322771
2023
447,750
6,734,250
0.41
322710
2023
447,400
6,734,000
0.40
322627
2022
447,475
6,733,075
0.39
323214
2022
447,550
6,733,575
0.39
323145
2022
447,450
6,733,650
0.39
322993
2022
447,450
6,733,250
0.39
323062
2022
447,575
6,733,750
0.39
322994
2022
447,475
6,733,250
0.38
323059
2022
447,500
6,733,750
0.38
322606
2022
447,425
6,733,100
0.37
322884
2022
447,400
6,733,375
0.37
322995
2022
447,500
6,733,250
0.37
323257
2022
447,525
6,733,525
0.37
323013
2022
447,450
6,733,800
0.36
322733
2023
447,550
6,734,100
0.36
322624
2022
447,400
6,733,075
0.35
323238
2022
447,575
6,733,550
0.35
323260
2022
447,600
6,733,525
0.35
322992
2022
447,425
6,733,250
0.35
323031
2022
447,375
6,733,775
0.35
323154
2022
447,675
6,733,650
0.34
323174
2022
447,650
6,733,625
0.34
323057
2022
447,450
6,733,750
0.33
323098
2022
447,375
6,733,700
0.33
323106
2022
447,575
6,733,700
0.32
323168
2022
447,500
6,733,625
0.30
322724
2023
447,400
6,733,850
0.30
322848
2022
447,600
6,733,425
0.30
322684
2023
447,650
6,734,250
0.29
322845
2022
447,525
6,733,425
0.29
322769
2023
447,700
6,734,200
0.28
323215
2022
447,575
6,733,575
0.28
323299
2022
447,475
6,733,475
0.28
322924
2022
447,300
6,733,325
0.28
323219
2022
447,675
6,733,575
0.27
323152
2022
447,625
6,733,650
0.27
323170
2022
447,550
6,733,625
0.26
323213
2022
447,525
6,733,575
0.26
322755
2023
447,650
6,733,850
0.25
322746
2023
447,500
6,733,950
0.25
323218
2022
447,650
6,733,575
0.25
322822
2022
447,475
6,733,450
0.24
322820
2022
447,425
6,733,450
0.24
323104
2022
447,525
6,733,700
0.24
322858
2022
447,250
6,733,400
0.24
323284
2022
447,625
6,733,500
0.24
322801
2022
447,525
6,733,475
0.23
322768
2023
447,700
6,734,150
0.23
323148
2022
447,525
6,733,650
0.23
323167
2022
447,475
6,733,625
0.22
322823
2022
447,500
6,733,450
0.22
322528
2022
447,375
6,733,200
0.22
322765
2023
447,650
6,734,100
0.22
322933
2022
447,525
6,733,325
0.22
323054
2022
447,375
6,733,750
0.21
322605
2022
447,400
6,733,100
0.21
323100
2022
447,425
6,733,700
0.21
322610
2022
447,525
6,733,100
0.21
323164
2022
447,400
6,733,625
0.21
323243
2022
447,700
6,733,550
0.20
323253
2022
447,425
6,733,525
0.20
322618
2022
447,850
6,733,100
0.20
322720
2023
447,450
6,734,000
0.20
322826
2022
447,575
6,733,450
0.20
323241
2022
447,650
6,733,550
0.20
322731
2023
447,550
6,734,200
0.20
322849
2022
447,625
6,733,425
0.20
322872
2022
447,625
6,733,400
0.20
323073
2022
447,325
6,733,725
0.19
322989
2022
447,350
6,733,250
0.19
322749
2023
447,550
6,733,850
0.19
323198
2022
447,675
6,733,600
0.18
323020
2022
447,625
6,733,800
0.18
322870
2022
447,575
6,733,400
0.18
322958
2022
447,575
6,733,300
0.18
322718
2023
447,450
6,734,100
0.18
322843
2022
447,475
6,733,425
0.18
323233
2022
447,450
6,733,550
0.18
322951
2022
447,400
6,733,300
0.18
322807
2022
447,675
6,733,475
0.17
323255
2022
447,475
6,733,525
0.17
323141
2022
447,350
6,733,650
0.17
322952
2022
447,425
6,733,300
0.17
322705
2023
447,350
6,734,150
0.16
322905
2022
447,350
6,733,350
0.16
323079
2022
447,475
6,733,725
0.16
323017
2022
447,550
6,733,800
0.16
323076
2022
447,400
6,733,725
0.16
323195
2022
447,600
6,733,600
0.15
323234
2022
447,475
6,733,550
0.15
323038
2022
447,550
6,733,775
0.15
322949
2022
447,350
6,733,300
0.15
322572
2022
447,525
6,733,150
0.15
323032
2022
447,400
6,733,775
0.14
322806
2022
447,650
6,733,475
0.14
323066
2022
447,675
6,733,750
0.14
323283
2022
447,600
6,733,500
0.14
323171
2022
447,575
6,733,625
0.14
322531
2022
447,450
6,733,200
0.14
322766
2023
447,650
6,734,050
0.13
323034
2022
447,450
6,733,775
0.13
323078
2022
447,450
6,733,725
0.13
322570
2022
447,475
6,733,150
0.13
322679
2023
447,400
6,734,250
0.13
322569
2022
447,450
6,733,150
0.13
322529
2022
447,400
6,733,200
0.13
322929
2022
447,425
6,733,325
0.13
322997
2022
447,550
6,733,250
0.13
323166
2022
447,450
6,733,625
0.13
323248
2022
447,300
6,733,525
0.13
322885
2022
447,425
6,733,375
0.12
322775
2023
447,750
6,734,050
0.12
322977
2022
447,525
6,733,275
0.12
323039
2022
447,575
6,733,775
0.12
323262
2022
447,650
6,733,525
0.12
322640
2022
447,325
6,733,050
0.12
322821
2022
447,450
6,733,450
0.12
323082
2022
447,550
6,733,725
0.11
323155
2022
447,700
6,733,650
0.11
323191
2022
447,500
6,733,600
0.11
322565
2022
447,350
6,733,150
0.11
322817
2022
447,350
6,733,450
0.11
323240
2022
447,625
6,733,550
0.11
323163
2022
447,375
6,733,625
0.11
322756
2023
447,650
6,733,900
0.11
323277
2022
447,450
6,733,500
0.10
323281
2022
447,550
6,733,500
0.10
323009
2022
447,350
6,733,800
0.10
323267
2022
447,100
6,733,500
0.10
323285
2022
447,650
6,733,500
0.10
322752
2023
447,600
6,733,950
0.10
Appendix 3 - Kennecott 1983 Trench Rock Chip Channel Sample Results22- GDA94 z56 (location approximate - digitized from a referenced plan and validated location on ground).
Easting (m)
Northing (m)
From (m)
To (m)
Interval (m)
Au g/t Fire Assay
Au g/t AAS
Au g/t Av
447,634
6,733,528
0
5
5
0.5
0.4
0.45
447,629
6,733,529
5
10
5
0.5
0.6
0.55
447,624
6,733,530
10
15
5
0.4
0.7
0.55
447,619
6,733,531
15
20
5
0.6
0.4
0.5
447,614
6,733,532
20
25
5
0.4
0.45
0.425
447,609
6,733,533
25
30
5
0.4
0.35
0.375
447,604
6,733,534
30
35
5
7.1
12.6
9.85
447,600
6,733,535
35
40
5
0.4
0.2
0.3
447,594
6,733,536
40
45
5
0.4
0.45
0.425
447,590
6,733,537
45
50
5
0.05
0.45
0.25
447,585
6,733,538
50
55
5
0.3
0.2
0.25
447,580
6,733,539
55
60
5
2.1
3.1
2.6
447,575
6,733,540
60
65
5
0.7
0.7
0.7
447,570
6,733,541
65
70
5
0.5
0.05
0.275
447,565
6,733,542
70
75
5
0.3
0.75
0.525
447,560
6,733,543
75
80
5
0.7
0.8
0.75
447,555
6,733,544
80
85
5
0.3
0.25
0.275
447,551
6,733,545
85
90
5
0.05
0.025
0.0375
447,546
6,733,546
90
95
5
0.1
0.025
0.0625
447,541
6,733,548
95
100
5
0.05
0.1
0.075
447,536
6,733,549
100
105
5
0.2
0.025
0.1125
447,531
6,733,550
105
110
5
0.1
0.025
0.0625
447,526
6,733,551
110
115
5
0.6
0.1
0.35
447,521
6,733,552
115
120
5
0.5
0.15
0.325
447,516
6,733,553
120
125
5
0.1
0.15
0.125
447,511
6,733,554
125
130
5
0.3
0.45
0.375
447,506
6,733,555
130
135
5
0.2
0.025
0.1125
447,502
6,733,556
135
140
5
0.5
0.2
0.35
447,497
6,733,557
140
145
5
18
11.5
14.75
447,492
6,733,558
145
150
5
0.05
0.025
0.0375
447,487
6,733,559
150
155
5
0.2
0.025
0.1125
447,482
6,733,560
155
160
5
0.3
0.05
0.3
447,477
6,733,561
160
165
5
0.1
0
0.05
447,472
6,733,562
165
170
5
0.1
0.025
0.063
447,468
6,733,563
170
175
5
0.05
0.1
0.075
447,462
6,733,564
175
180
5
0.1
0.025
0.063
447,457
6,733,565
180
185
5
0.1
0.025
0.063
447,452
6,733,566
185
190
5
0.4
0.025
0.213
447,448
6,733,567
190
195
5
0.05
0.025
0.038
447,443
6,733,568
195
200
5
0.1
0.025
0.063
447,438
6,733,569
200
205
5
0.05
0.025
0.038
447,433
6,733,570
205
210
5
0.5
0.25
0.375
447,428
6,733,571
210
215
5
0.05
0.025
0.038
447,423
6,733,572
215
220
5
0.1
0.4
0.25
Appendix 4 - Significant Intercepts reported by Manhattan for their 2023 RC program at Clone23. A > 0.5 g/t Au cut off was used for the calculations, with a maximum of 2 m internal dilution applied. Locations are in GDA94 zone 54.
Hole ID
Easting (m)
Northing (m)
Dip
Azimuth
Depth (m)
From (m)
To (m)
Intercept (g/t Au)
CL0001
584300
6725725
-60
269
96
61
64
3 m @ 0.5 g/t Au
71
94
23 m @ 0.51 g/t Au
CL0002
584330
6725725
-60
270
120
47
48
1 m @ 1.48 g/t Au
60
91
31 m @ 1.29 g/t Au
Incl.
78
81
3 m @ 6.52 g/t Au
CL0003
584300
6725700
-60
90
72
18
22
4 m @ 1.43 g/t Au
CL0004
584280
6725700
-60
90
120
43
44
1 m @ 1.85 g/t Au
66
72
6 m @ 4.22 g/t Au
Incl.
68
70
2 m @ 11.65 g/t Au
CL0005
584310
6725670
-60
90
90
17
29
12 m @ 0.53 g/t Au
35
39
4 m @ 0.55 g/t Au
44
49
5 m @ 1.63 g/t Au
Incl.
44
48
4 m @ 1.95 g/t Au
CL0006
584290
6725670
-60
90
138
38
42
4 m @ 1.64 g/t Au
CL0007
584270
6725670
-60
90
180
57
59
2 m @ 0.74 g/t Au
62
67
5 m @ 0.69 g/t Au
81
88
7 m @ 7.23 g/t Au
Incl.
83
86
3 m @ 16.1 g/t Au
CL0008
584310
6725675
-60
120
186
24
26
2 m @ 1.84 g/t Au
39
42
3 m @ 0.59 g/t Au
61
67
6 m @ 0.92 g/t Au
Incl.
61
65
4 m @ 1.22 g/t Au
CL0009
584325
6725650
-60
90
108
19
32
13 m @ 0.77 g/t Au
Incl.
24
31
7 m @ 1.18 g/t Au
37
40
3 m @ 0.58 g/t Au
CL0010
584390
6725500
-60
90
120
16
25
9 m @ 6.03 g/t Au
31
32
1 m @ 1.03 g/t Au
Appendix 5 - Significant Intercepts reported by Manhattan for their diamond program at New Bendigo24. A > 0.5 g/t Au cut off was used for the calculations, with a maximum of 2 m internal dilution applied. Locations are in GDA94 zone 54.
Hole ID
Easting (m)
Northing (m)
Dip
Azimuth
Depth (m)
From (m)
To (m)
Type
Intercept (g/t Au)
NB0107
587,510
6,719,419
-60.2
270.1
282.7
6
7
RC
1 m @ 1.04 g/t Au
89
90
RC
1 m @ 0.54 g/t Au
138.2
138.75
HQ3
0.55 m @ 2.29 g/t Au
178
180
HQ3
2 m @ 0.83 g/t Au
NB0123
587,483
6,719,372
-61.5
268.3
201.6
6
10
RC
4 m @ 1.87 g/t Au
65
66
RC
1 m @ 0.62 g/t Au
111
112
RC
1 m @ 1.08 g/t Au
117
120
RC
3 m @ 1.95 g/t Au
145
147
RC
2 m @ 2.03 g/t Au
NBD004
587,459
6,719,388
-60.6
331
294.7
50
57
HQ3
7 m @ 0.64 g/t Au
50
53
HQ3
3 m @ 1.09 g/t Au
60
71
HQ3
11 m @ 0.53 g/t Au
Incl.
65
67
HQ3
2 m @ 1.2 g/t Au
104
108
HQ3
4 m @ 1.1 g/t Au
Incl.
198
202
HQ3
4 m @ 1.44 g/t Au
208
210
HQ3
2 m @ 0.79 g/t Au
NBD005
587,364
6,719,476
-60
90
161.7
82
106
HQ3
24 m @ 3.55 g/t Au
Incl.
96
100
HQ3
4 m @ 20.11 g/t Au
Or….
96
97.02
HQ3
1.02 m @ 70.2 g/t Au*
NBD006
587,467
6,719,318
-60
90
120.1
50
51
HQ3
1 m @ 0.69 g/t Au
72
73
HQ3
1 m @ 0.65 g/t Au
NB0007
587,313
6,719,039
-60
90
140.1
68
72
HQ3
4 m @ 0.97 g/t Au
* Alternative increased grade cut off selected by Manhattan for reporting of higher-grade components.
Appendix 6 - Significant Intercepts reported by Manhattan for their RC drilling programs at New Bendigo25. A > 0.5 g/t Au cut off was used for the calculations, with a maximum of 2 m internal dilution applied. Locations are in GDA94 zone 54.
Hole ID
Easting (m)
Northing (m)
Dip
Azimuth
Depth (m)
From (m)
To (m)
Intercept (g/t Au)
NB0001
587,615
6,719,182
-60
237
118
19
21
2 m @ 0.9 g/t Au
28
29
1 m @ 5.49 g/t Au
41
42
1 m @ 0.78 g/t Au
64
65
1 m @ 0.68 g/t Au
NB0002
587,595
6,719,168
-60
238
84
10
11
1 m @ 0.5 g/t Au
17
19
2 m @ 2.24 g/t Au
30
34
4 m @ 0.81 g/t Au
46
47
1 m @ 3.27 g/t Au
NB0003
587,578
6,719,161
-61
237
51
25
28
3 m @ 0.95 g/t Au
NB0004
587,587
6,719,169
-60
236
51
4
5
1 m @ 2.14 g/t Au
28
30
2 m @ 0.69 g/t Au
35
37
2 m @ 2.26 g/t Au
NB0005
587,560
6,719,204
-60
236
63
39
42
3 m @ 1.09 g/t Au
NB0006
587,585
6,719,219
-60
237
99
9
10
1 m @ 0.53 g/t Au
14
16
2 m @ 3.14 g/t Au
21
26
5 m @ 0.81 g/t Au
36
38
2 m @ 0.82 g/t Au
61
64
3 m @ 1.56 g/t Au
NB0007
587,599
6,719,145
-60
236
87
3
5
2 m @ 2.04 g/t Au
NB0008
587,618
6,719,157
-60
236
105
21
27
6 m @ 0.97 g/t Au
32
33
1 m @ 0.7 g/t Au
37
38
1 m @ 0.95 g/t Au
45
46
1 m @ 2.76 g/t Au
NB0009
587,591
6,719,140
-60
235
63
2
4
2 m @ 0.76 g/t Au
NB0010
587,498
6,719,371
-60
238
105
40
42
2 m @ 0.64 g/t Au
NB0011
587,480
6,719,353
-62
238
51
29
30
1 m @ 0.71 g/t Au
34
35
1 m @ 0.89 g/t Au
NB0012
587,467
6,719,346
-60
237
39
NSI
NB0013
587,500
6,719,347
-60
238
57
3
4
1 m @ 0.65 g/t Au
5
6
1 m @ 0.54 g/t Au
40
42
2 m @ 0.88 g/t Au
NB0014
587,492
6,719,341
-61
236
45
36
39
3 m @ 1.41 g/t Au
NB0015
587,522
6,719,320
-61
240
69
15
16
1 m @ 0.69 g/t Au
18
19
1 m @ 0.53 g/t Au
45
46
1 m @ 0.82 g/t Au
NB0016
587,565
6,719,246
-59
237
93
42
45
3 m @ 0.7 g/t Au
58
59
1 m @ 1.52 g/t Au
NB0017
587,553
6,719,236
-60
236
105
27
28
1 m @ 0.79 g/t Au
48
49
1 m @ 0.52 g/t Au
NB0018
587,532
6,719,221
-60
238
57
NSI
NB0019
587,543
6,719,191
-60
235
45
8
11
3 m @ 1.96 g/t Au
NB0020
587,422
6,719,481
-60
236
121
18
19
1 m @ 0.55 g/t Au
109
113
4 m @ 0.59 g/t Au
NB0021
587,456
6,719,503
-60
236
159
87
89
2 m @ 17.3 g/t Au
95
96
1 m @ 0.55 g/t Au
105
107
2 m @ 2.61 g/t Au
121
122
1 m @ 0.99 g/t Au
NB0022
587,405
6,719,470
-60
238
123
NSI
NB0023
587,405
6,719,058
-61
239
147
87
94
7 m @ 18.16 g/t Au
NB0024
587,372
6,719,038
-60
235
105
31
32
1 m @ 1.1 g/t Au
39
40
1 m @ 0.8 g/t Au
50
55
5 m @ 1.12 g/t Au
NB0025
587,273
6,719,252
-60
239
147
NSI
NB0026
587,537
6,719,323
-61
238
75
57
60
3 m @ 1.39 g/t Au
NB0027
587,550
6,719,331
-60
235
99
73
75
2 m @ 9.28 g/t Au
NB0028
587,600
6,719,267
-60
238
141
NSI
NB0029
587,487
6,719,528
-60
235
183
165
166
1 m @ 0.56 g/t Au
NB0030
587,639
6,719,151
-59
240
111
48
52
4 m @ 0.84 g/t Au
64
65
1 m @ 0.91 g/t Au
75
77
2 m @ 0.65 g/t Au
NB0031
587,628
6,719,142
-60
238
93
11
13
2 m @ 0.92 g/t Au
16
17
1 m @ 0.62 g/t Au
20
21
1 m @ 6.24 g/t Au
43
44
1 m @ 1.74 g/t Au
NB0032
587,457
6,719,387
-60
237
129
29
34
5 m @ 0.57 g/t Au
89
91
2 m @ 13.71 g/t Au
NB0033
587,602
6,719,180
-60
236
87
11
41
30 m @ 4.03 g/t Au
Incl.
11
16
5 m @ 20.86 g/t Au
NB0034
587,353
6,719,023
-60
238
57
11
13
2 m @ 0.84 g/t Au
28
35
7 m @ 0.78 g/t Au
Incl.
28
32
4 m @ 1.05 g/t Au
NB0035
587,389
6,719,046
-61
236
117
NSI
NB0036
587,419
6,719,066
-61
236
153
NSI
NB0037
587,376
6,718,990
-60
238
80
13
15
2 m @ 1.28 g/t Au
18
22
4 m @ 0.93 g/t Au
Incl.
20
22
2 m @ 1.24 g/t Au
28
29
1 m @ 0.86 g/t Au
NB0038
587,410
6,719,010
-61
236
111
NSI
NB0039
587,449
6,719,036
-61
238
147
122
123
1 m @ 4.15 g/t Au
NB0040
587,332
6,719,061
-62
238
75
15
16
1 m @ 0.77 g/t Au
43
44
1 m @ 0.64 g/t Au
NB0041
587,368
6,719,078
-61
239
117
105
106
1 m @ 0.6 g/t Au
NB0042
587,403
6,719,101
-61
238
159
NSI
NB0043
587,431
6,719,448
-61
238
129
34
35
1 m @ 1 g/t Au
99
102
3 m @ 0.74 g/t Au
Incl.
99
100
1 m @ 1.53 g/t Au
NB0044
587,369
6,719,547
-61
239
177
60
61
1 m @ 0.79 g/t Au
74
76
2 m @ 2.19 g/t Au
NB0045
587,401
6,719,570
-61
239
201
101
102
1 m @ 0.96 g/t Au
114
115
1 m @ 0.66 g/t Au
166
167
1 m @ 0.91 g/t Au
NB0046
587,424
6,719,368
-62
237
99
NSI
NB0047
587,572
6,719,296
-61
237
135
45
46
1 m @ 0.63 g/t Au
75
77
2 m @ 3.04 g/t Au
NB0048
587,554
6,719,285
-61
237
117
37
38
1 m @ 0.89 g/t Au
57
58
1 m @ 0.52 g/t Au
64
65
1 m @ 0.7 g/t Au
NB0049
587,525
6,719,266
-61
237
93
23
24
1 m @ 0.67 g/t Au
26
27
1 m @ 0.62 g/t Au
30
31
1 m @ 0.51 g/t Au
41
42
1 m @ 0.51 g/t Au
72
73
1 m @ 1.63 g/t Au
NB0050
587,605
6,719,081
-61
237
69
59
61
2 m @ 0.8 g/t Au
NB0051
587,621
6,719,091
-61
237
93
6
10
4 m @ 0.83 g/t Au
70
72
2 m @ 1.23 g/t Au
NB0052
587,656
6,719,114
-61
242
135
34
37
3 m @ 1.71 g/t Au
43
46
3 m @ 1.55 g/t Au
74
75
1 m @ 0.64 g/t Au
NB0053
587,689
6,719,135
-61
238
147
54
55
1 m @ 0.58 g/t Au
81
82
1 m @ 0.51 g/t Au
88
91
3 m @ 0.58 g/t Au
96
97
1 m @ 0.71 g/t Au
101
103
2 m @ 0.65 g/t Au
NB0054
587,427
6,718,900
-61
237
81
NSI
NB0055
587,457
6,718,924
-61
237
123
NSI
NB0056
587,490
6,718,945
-61
239
141
1
2
1 m @ 5.4 g/t Au
NB0057
587,532
6,718,971
-61
236
171
93
94
1 m @ 0.5 g/t Au
NB0058
587,622
6,719,013
-62
237
117
NSI
NB0059
587,652
6,719,034
-61
237
87
NSI
NB0060
587,687
6,719,056
-62
237
135
1
2
1 m @ 0.91 g/t Au
6
7
1 m @ 0.56 g/t Au
18
20
2 m @ 0.59 g/t Au
59
63
4 m @ 0.84 g/t Au
Incl.
61
63
2 m @ 1.14 g/t Au
NB0061
587,716
6,719,076
-62
239
165
51
55
4 m @ 0.93 g/t Au
66
67
1 m @ 0.77 g/t Au
74
77
3 m @ 1.88 g/t Au
84
85
1 m @ 0.88 g/t Au
102
103
1 m @ 0.58 g/t Au
106
107
1 m @ 0.64 g/t Au
NB0062
587,331
6,719,527
-61
239
171
135
138
3 m @ 0.56 g/t Au
NB0063
587,441
6,719,595
-61
238
237
153
154
1 m @ 0.51 g/t Au
172
173
1 m @ 0.72 g/t Au
NB0064
587,434
6,719,327
-61
236
81
NSI
NB0065
587,448
6,719,337
-61
238
93
83
84
1 m @ 0.67 g/t Au
NB0066
587,490
6,719,294
-61
237
75
20
21
1 m @ 0.63 g/t Au
NB0067
587,508
6,719,306
-62
239
129
4
5
1 m @ 1.46 g/t Au
36
37
1 m @ 1.82 g/t Au
65
66
1 m @ 0.68 g/t Au
109
118
9 m @ 0.93 g/t Au
Incl.
110
116
6 m @ 1.11 g/t Au
NB0068
587,242
6,719,429
-62
239
93
NSI
NB0069
587,275
6,719,450
-61
238
117
NSI
NB0070
587,592
6,718,776
-61
236
153
9
10
1 m @ 0.92 g/t Au
NB0071
587,621
6,718,793
-62
238
159
68
69
1 m @ 0.64 g/t Au
NB0072
587,555
6,718,752
-61
238
69
NSI
NB0073
587,557
6,719,180
-60
270
73
NSI
NB0074
587,575
6,719,181
-60
270
84
41
42
1 m @ 1.88 g/t Au
NB0075
587,585
6,719,180
-60
270
84
6
7
1 m @ 1.47 g/t Au
28
30
2 m @ 1.29 g/t Au
51
52
1 m @ 1.53 g/t Au
NB0076
587,599
6,719,177
-60
270
120
0
2
2 m @ 0.80 g/t Au
10
11
1 m @ 1.74 g/t Au
31
36
5 m @ 1.03 g/t Au
Incl.
31
33
2 m @ 1.62 g/t Au
42
43
1 m @ 1.29 g/t Au
NB0077
587,618
6,719,179
-60
270
132
23
24
1 m @ 0.66 g/t Au
31
32
1 m @ 8.34 g/t Au
47
48
1 m @ 0.52 g/t Au
59
60
1 m @ 0.64 g/t Au
NB0078
587,647
6,719,177
-60
270
114
61
62
1 m @ 0.67 g/t Au
66
69
3 m @ 0.70 g/t Au
71
72
1 m @ 0.57 g/t Au
74
75
1 m @ 0.55 g/t Au
77
78
1 m @ 0.50 g/t Au
101
104
3 m @ 2.02 g/t Au
NB0079
587,576
6,719,224
-60
270
120
10
10.5
0.5 m @ 1.20 g/t Au
10.5
14
3.5 m @ NSI g/t Au
14
15
1 m @ 0.58 g/t Au
18
26
8 m @ 1.08 g/t Au
37
38
1 m @ 1.00 g/t Au
59
60
1 m @ 0.90 g/t Au
NB0080
587,593
6,719,222
-60
270
132
7
9
2 m @ 1.82 g/t Au
73
74
1 m @ 1.60 g/t Au
NB0081
587,507
6,719,215
-60
90
144
39
40
1 m @ 1.02 g/t Au
126
129
3 m @ 4.67 g/t Au
Incl.
126
128
2 m @ 6.74 g/t Au
138
139
1 m @ 0.50 g/t Au
NB0082
587,595
6,719,140
-60
270
54
24
28
4 m @ 2.16 g/t Au
Incl.
26
27
1 m @ 6.78 g/t Au
NB0083
587,620
6,719,135
-60
270
72
1
17
16 m @ 13.89 g/t Au
Incl.
7
10
3 m @ 69.20 g/t Au
24
25
1 m @ 1.04 g/t Au
53
55
2 m @ 1.08 g/t Au
NB0084
587,635
6,719,139
-60
270
90
29
31
2 m @ 2.43 g/t Au
49
51
2 m @ 1.58 g/t Au
54
55
1 m @ 1.17 g/t Au
69
70
1 m @ 1.40 g/t Au
83
84
1 m @ 0.59 g/t Au
NB0085
587,645
6,719,143
-60
270
114
50
52
2 m @ 0.54 g/t Au
NB0086
587,539
6,719,255
-60
270
90
26
27
1 m @ 0.92 g/t Au
32
33
1 m @ 1.26 g/t Au
36
38
2 m @ 0.79 g/t Au
Incl.
37
38
1 m @ 1.07 g/t Au
NB0087
587,558
6,719,258
-60
270
120
45
46
1 m @ 0.63 g/t Au
57
59
2 m @ 0.50 g/t Au
NB0088
587,534
6,719,318
-60
270
120
41
44
3 m @ 0.60 g/t Au
56
63
7 m @ 2.89 g/t Au
Incl.
62
63
1 m @ 15.45 g/t Au
66
68
2 m @ 0.88 g/t Au
NB0089
587,550
6,719,323
-60
270
108
70
78
8 m @ 40.50 g/t Au
Incl.
70
73
3 m @ 105.34 g/t Au
NB0090
587,589
6,719,217
-60
270
126
12
18
6 m @ 1.93 g/t Au
Incl.
16
18
2 m @ 4.29 g/t Au
42
43
1 m @ 1.44 g/t Au
68
71
3 m @ 0.58 g/t Au
116
117
1 m @ 0.57 g/t Au
NB0091
587,579
6,719,261
-60
270
84
41
43
2 m @ 0.74 g/t Au
64
65
1 m @ 1.59 g/t Au
NB0092
587,491
6,719,359
-60
270
150
35
37
2 m @ 1.05 g/t Au
114
115
1 m @ 2.92 g/t Au
NB0093
587,510
6,719,327
-60
270
79
4
21
17 m @ 1.13 g/t Au
Incl.
6
10
4 m @ 2.42 g/t Au
and:
15
16
1 m @ 6.29 g/t Au
47
48
1 m @ 0.57 g/t Au
NB0094
587,530
6,719,326
-61
270
91
47
71
24 m @ 0.52 g/t Au
Incl.
58
67
9 m @ 1.06 g/t Au
NB0095
587,550
6,719,326
-60
272
109
NSI
NB0096
587,569
6,719,326
-60
269
133
108
109
1 m @ 1.14 g/t Au
NB0097
587,511
6,719,359
-60
272
73
4
5
1 m @ 0.53 g/t Au
61
63
2 m @ 1.02 g/t Au
NB0098
587,526
6,719,358
-59
271
96
82
84
2 m @ 3.18 g/t Au
NB0099
587,549
6,719,358
-60
272
108
95
96
1 m @ 0.83 g/t Au
NB0100
587,563
6,719,357
-60
273
144
NSI
NB0101
587,549
6,719,348
-60
270
108
82
83
1 m @ 0.75 g/t Au
105
106
1 m @ 0.69 g/t Au
NB0102
587,507
6,719,373
-60
272
162
84
86
2 m @ 4.08 g/t Au
96
97
1 m @ 0.73 g/t Au
157
158
1 m @ 2.77 g/t Au
NB0103
587,526
6,719,372
-60
271
144
NSI
NB0104
587,550
6,719,372
-60
270
144
NSI
NB0105
587,470
6,719,420
-61
269
126
11
92
81 m @ 1.04 g/t Au
Incl.
52
66
14 m @ 4.77 g/t Au
Incl.
76
77
1 m @ 10.3 g/t Au
NB0106
587,489
6,719,420
-60
272
150
9
12
3 m @ 4.51 g/t Au
71
74
3 m @ 0.67 g/t Au
98
99
1 m @ 5.49 g/t Au
126
128
2 m @ 3.9 g/t Au
NB0107
587,509
6,719,419
-60
270
128
6
7
1 m @ 1.04 g/t Au
89
90
1 m @ 0.54 g/t Au
NB0108
587,450
6,719,440
-61
270.34
120
51
53
2 m @ 0.79 g/t Au
NB0109
587,470
6,719,440
-60
269.05
144
10
11
1 m @ 1.08 g/t Au
13
14
1 m @ 0.52 g/t Au
66
71
5 m @ 0.58 g/t Au
87
100
13 m @ 1.41 g/t Au
Incl.
90
93
3 m @ 4.65 g/t Au
112
113
1 m @ 0.51 g/t Au
NB0110
587,490
6,719,440
-60
269.66
162
10
13
3 m @ 4.32 g/t Au
108
110
2 m @ 1.2 g/t Au
115
123
8 m @ 0.76 g/t Au
Incl.
118
119
1 m @ 2.89 g/t Au
128
129
1 m @ 0.51 g/t Au
NB0111
587,510
6,719,440
-60
266.17
180
7
8
1 m @ 0.66 g/t Au
106
107
1 m @ 0.66 g/t Au
NB0112
587,440
6,719,480
-59
267.98
114
48
49
1 m @ 0.95 g/t Au
64
66
2 m @ 1.7 g/t Au
91
92
1 m @ 0.53 g/t Au
NB0113
587,460
6,719,480
-60
268.73
132
7
8
1 m @ 0.99 g/t Au
92
111
19 m @ 5.02 g/t Au
Incl.
97
104
7 m @ 13.1 g/t Au
Or….
97
102
5 m @ 18.01 g/t Au
And.
109
111
2 m @ 1.01 g/t Au
122
123
1 m @ 2.87 g/t Au
126
127
1 m @ 0.56 g/t Au
130
132
2 m @ 1.48 g/t Au
NB0114
587,480
6,719,480
-60
268.57
162
9
10
1 m @ 11.1 g/t Au
126
128
2 m @ 1.07 g/t Au
144
145
1 m @ 0.53 g/t Au
NB0115
587,530
6,719,290
-60
270.59
90
44
46
2 m @ 1.51 g/t Au
NB0116
587,550
6,719,290
-60
269.39
102
35
36
1 m @ 0.58 g/t Au
NB0117
587,570
6,719,290
-59
271.71
160
NSI
NB0118
587,590
6,719,290
-62
270.08
180
90
110
20 m @ 0.6 g/t Au
107
109
2 m @ 3.11 g/t Au
NB0119
587,430
6,719,390
-64
271.04
132
NSI
NB0120
587,450
6,719,390
-63
269.93
150
105
106
1 m @ 0.5 g/t Au
NB0121
587,470
6,719,390
-64
271.55
168
36
37
1 m @ 0.9 g/t Au
108
109
1 m @ 0.71 g/t Au
NB0122
587,490
6,719,392
-63
271.92
180
11
12
1 m @ 0.78 g/t Au
50
63
13 m @ 6.16 g/t Au
Incl.
51
54
3 m @ 25.48 g/t Au
70
78
8 m @ 2.52 g/t Au
Incl.
72
73
1 m @ 17.85 g/t Au
133
134
1 m @ 1.75 g/t Au
140
141
1 m @ 0.67 g/t Au
154
155
1 m @ 0.52 g/t Au
NB0123
587,486
6,719,373
-62
268.34
150
6
10
4 m @ 1.87 g/t Au
65
66
1 m @ 0.62 g/t Au
111
120
9 m @ 0.82 g/t Au
Incl.
117
119
2 m @ 2.77 g/t Au
145
150
5 m @ 0.77 g/t Au
NB0124
587,250
6,719,696
-60
272.53
120
NSI
NB0125
588,012
6,718,586
-62
275.26
96
NSI
NB0126
588,591
6,717,212
-62
272.88
138
128
129
1 m @ 0.89 g/t Au
NB0127
588,742
6,717,214
-62
271.57
138
69
70
1 m @ 0.61 g/t Au
NB0128
587,482
6,719,357
-60
140
120
44
46
2 m @ 1.02 g/t Au
50
52
2 m @ 0.66 g/t Au
NB0129
587,499
6,719,323
-60
140
60
55
59
4 m @ 1.63 g/t Au
Incl.
56
58
2 m @ 2.53 g/t Au
NB0130
587,367
6,719,503
-60
90
132
17
19
2 m @ 4.48 g/t Au
22
24
2 m @ 9.78 g/t Au
65
69
4 m @ 0.85 g/t Au
102
105
3 m @ 0.71 g/t Au
NB0131
587,382
6,719,483
-60
90
102
58
62
4 m @ 0.52 g/t Au
82
89
7 m @ 4.76 g/t Au
Incl.
85
88
3 m @ 8.96 g/t Au
NB0132
587,613
6,719,142
-60
345
72
0
16
16 m @ 0.54 g/t Au
24
26
2 m @ 0.96 g/t Au
50
56
6 m @ 0.91 g/t Au
70
72
2 m @ 2.03 g/t Au
NB0133
587,605
6,719,155
-60
345
48
27
48
21 m @ 1.23 g/t Au
Incl.
28
31
3 m @ 2.37 g/t Au
And.
42
46
4 m @ 2.7 g/t Au
NB0134
587,598
6,719,156
-60
140
60
7
13
6 m @ 0.73 g/t Au
19
26
7 m @ 0.5 g/t Au
47
49
2 m @ 0.8 g/t Au
NB0135
587,588
6,719,175
-60
140
102
14
16
2 m @ 0.55 g/t Au
20
37
17 m @ 1.05 g/t Au
41
54
13 m @ 2.57 g/t Au
Incl.
47
50
3 m @ 8.71 g/t Au
NB0136
587,575
6,719,200
-60
138
150
27
35
8 m @ 0.6 g/t Au
75
79
4 m @ 5.97 g/t Au
88
90
2 m @ 2.88 g/t Au
* Alternative increased grade cut off selected by Manhattan for reporting of higher-grade components.
_______________ 20 Refer to ASX news release by TechGen Metals Limited dated 12/09/2022 - Gold Discovery Confirmed John Bull Gold Project 21 Refer to ASX news release by TechGen Metals Limited dated 7/09/2023 - Stage 2 RC Drilling Results Confirm Large Scale Gold System, John Bull Gold Project 22 Refer to ASX news release by Zenith Minerals Ltd dated 10/09/2020 - New Gold Project Secured in NSW 23 Refer to ASX news release by Manhattan Corp dated 10/07/2023 - New High-Grade Gold Discovery 24 Refer to ASX news release by Manhattan Corp dated 27/10/2022 - Quarterly Activities Report September 2022 25 Refer to ASX news release by Manhattan Corp dated 10/07/2023 - New High-Grade Gold Discovery
JORC Code, 2012 Edition - Table 1
Section 1: Sampling Techniques and Data
(Criteria listed in the preceding section also apply to this section)
Criteria
JORC Code explanation
Commentary
Sampling techniques
Nature and quality of sampling (e.g., cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the Public Report.
In cases where 'industry standard' work has been done this would be relatively simple (e.g., 'reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases, more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (e.g., submarine nodules) may warrant disclosure of detailed information.
Kennecott Exploration (Australia) Ltd Trench- sampling reported by Southern Goldfields (GS 19861200) Trench Sampling - Historical sub-horizontal 5 m composite channel samples taken (non-biased). 5m hand channel samples of excavator dug trench. Sample assay repeats using both AAS and fire assay analysis. Results resemble recent drilling results.
TechGen 2022 and 2023 Soil Sample-Soil samples were collected from approximately 10-25 cm depths. Approximately 250 grams of -5 mm sieved soil was collected into a paper sample packet. Samples were submitted to ALS Laboratories in Brisbane for drying, sieving and pulverising prior to assaying for Au (Au-AA24) and then selective multi-element assaying (ME-MS61). The laboratory used internal standards to ensure quality control and standards were added in the field.
TechGen 2022 Drilling Reverse Circulation (RC) -Samples were submitted to ALS Laboratories in Brisbane for drying and pulverising to produce a 30g sample for Fire Assay gold analysis (Au-AA23). Samples of greater than 10glt Au were assayed by overlimit method Au-GRA21. A multi-element suite of elements was assayed by ICP-AES following a multi acid digestion (ME-ICP61). The laboratory used internal standards to ensure quality control.
TechGen 2023 Drilling Reverse Circulation (RC) -drilling samples were collected as 1 metre riffle split samples. The 1m samples were collected after passing the bulk sample through the splitter to create a sample of 1.5 - 3.5kg. Samples were submitted to ALS Laboratories in Brisbane for drying and pulverising to produce a 500 g sample for PhotonAssay gold analysis (Au-PA01) in Perth. The laboratory used internal standards to ensure quality control.
Manhattan 2023 Reverse Circulation (RC)drill holes were drilled with a face sampling hammer using industry practice drilling methods to obtain a 1 m representative sample. RC Drilling was completed by Resolution Drilling (Resolution) using a large capacity RC Rig (UDR1200) or Profile Drilling using a Schramm 660. Samples were collected over one metre intervals using a rig mounted rotary cone splitter to obtain a split representative sample (and duplicate sample where required) of approximately 2 to 3 kg for assaying. The sample system was routinely monitored and cleaned to minimise contamination. The split samples and any QA/QC samples were placed in Bulka Bags, sealed, and then transported to ALS in Adelaide for analysis.
Manhattan 2022 DiamondDrilling: core has been collected using standard industry practices to obtain representative sample utilising HQ3 diameter core and rotary mud pre-collars through transported and oxidised lithologies at the top of the hole. Resolution Drilling (Resolution) completed diamond drilling using a large capacity Rig (UDR1200). Within fresh rock, core is oriented for structural/geotechnical logging wherever possible. In oriented core, one half of the core was sampled over one metre intervals and submitted for fire assay. The other half of the core, including the bottom-of-hole orientation line, was retained for geological reference and potential further sampling such as metallurgical test work. In intervals of un-oriented core, the same half of the core has been sampled where possible, by extending a cut line from oriented intervals through into the un-oriented intervals. The lack of a consistent geological reference plane, (such as bedding or a foliation), precludes using geological features to orient the core. In areas of core that appeared to be unmineralized, the half core was cut in half (into quarter core) and submitted for analysis over intervals of generally 2 m
Drilling techniques
Drill type (e.g., core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (e.g., core diameter, triple or standard tube, depth of diamond tails, face-sampling bit, or other type, whether core is oriented and if so, by what method, etc).
TechGen 2022 and 2023 Drilling Reverse Circulation (RC) -RC drilling used a track mounted Ingersol-Rand T4 drill rig with a 5 3/4-inch face sampling hammer. An auxiliary compressor and booster were also utilised for some drill holes. Holes were surveyed downhole using a Reflex North Seeking Gyro tool.
Manhattan 2023 RC Drillingused a face sampling hammer using standard RC drilling Techniques employed by Resolution Drilling or Profile Drilling, both a specialist RC Drilling company. Downhole surveys were carried out on RC holes using a gyro survey tool every 30m to record the movement of the drill hole from the planned direction and inclination.
Manhattan 2022 DD Drillingwas completed by Resolution drilling utilising a UDR1200 drill rig, a specialist NSW based drilling contractor. Downhole surveys were carried out using a true shot (Boart) downhole survey tool every 30 m to record the movement of the drill hole from the planned direction and inclination. Diamond drilling utilised standardised coring techniques utilising HQ3 (triple tube)
Drill sample recovery
Method of recording and assessing core and chip sample recoveries and results assessed.
Measures taken to maximise sample recovery and ensure representative nature of the samples.
Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.
TechGen 2022 and 2023 Drilling Reverse Circulation (RC) -Recovery of drill chip material was estimated from sample piles and recorded at the time of drilling. Recoveries were considered adequate. The cyclone was regularly checked and cleaned. There is no relationship between sample recovery and grade.
Manhattan 2023 RC drilling -sample weight and recoveries were observed during the drilling with any wet, moist, and sample quality of the drill samples being recorded. All samples were deemed to be of acceptable quality. RC samples were checked by the geologist for volume, moisture content, possible contamination, and recoveries. Any issues were discussed with the drilling contractor. Sample spoils (residual) were placed in piles on the ground and representative chips collected by sieving part of the pile and washing the oversize component for storage in chip trays and logging.
Manhattan 2022 diamond drilling- recovered core for each drill run is recorded and measured against the expected core from that run. Core recovery is consistently high, with minor loss occurring in regolith and fractured ground.
Logging
Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography.
The total length and percentage of the relevant intersections logged.
Kennecott Exploration (Australia) Ltd Trench- simple descriptions only for entire trench
TechGen 2022 and 2023 Soil Sample- Soil sample descriptions were recorded in the field for all samples
TechGen 2022 and 2023 Drilling Reverse Circulation (RC).All drilling was geologically logged by a geologist at the time of drilling. Logging was qualitative in nature. All holes were geologically logged in full. Geotechnical logging has not been carried out.
Manhattan RC:A representative sample of the RC chips was collected from each of the drilled intervals (sampled every 1m), then logged and stored in chip trays for future reference. RC chips were logged for lithology, alteration, degree of weathering, fabric, colour, abundance of quartz veining and sulphide occurrence. All referenced RC chips in trays have been photographed and will be stored at the field facility in Tibooburra. Sample spoils (residual) were placed in piles on the ground.
Manhattan DD:Diamond core has been logged for lithology, alteration, and structure. Sample quality data recorded includes recovery, sample moisture (i.e., whether dry, moist, wet, and sampling methodology. Drill core is routinely orientated, photographed, and structurally logged.
Sub-sampling techniques and sample preparation
If core, whether cut or sawn and whether quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry.
For all sample types, the nature, quality, and appropriateness of the sample preparation technique.
Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples.
Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the material being sampled.
Kennecott Exploration (Australia) Ltd Trench -5m channel samples are appropriate for the type of sampling and style of mineralisation observed.Sample assay repeats of higher-grade zones of individual 5m trench samples indicate a degree of variability in results commonly associated with coarse gold. In addition to fire assay and AAS analyses, Kennecott re assayed trench sample intervals using a screen fire assay technique the results from which also seem to confirm the presence of coarse gold. Trench results average 160m @ 1.15 g/t Au, with (0.1 g/t Au cut-off and maximum dilution of 5m, no top cut). No details of QAQC were documented, although repeat assay has been performed and in addition to the original Kennecott sampling a second company Southern Goldfields reported results of their own sampling of outcropping quartz veins located near the trench, returning similar gold assay results. Recent drilling also supports the grades obtained in trench sampling.
TechGen 2022 and 2023 Soil SampleNo compositing of samples was undertaken. The soil samples were placed in a pre-numbered paper packet and submitted to ALS Laboratories in Brisbane. Sample preparation involved drying and pulverising of the whole sample. Laboratory repeats and standards were used. Sample sizes are considered appropriate for the grain size of the material sampled.
TechGen 2022 and 2023 Drilling Reverse Circulation (RC).The 1m samples were collected after passing the bulk sample through the splitter to create a sample of between 1.5 -3.5kg and placed in a pre-numbered calico bag and submitted to ALS Laboratories in Brisbane. Most samples were dry although some were moist or wet. These details were recorded at the time of drilling and sampling. Sample preparation for drill samples involved drying the whole sample, pulverising to 85% passing 75 microns. 2022 - A 30-gram sample charge was used for the Fire Assay analysis. 2023 - A 500 gram sample charge was then used for the PhotonAssay analysis. Laboratory repeats (1:20) and standards (1:20) and internal TechGen standards and blanks have been used to assess laboratory accuracy and reproducibility. Sample sizes are considered appropriate for the grain size of the material sampled.
Manhattan RC:all samples were collected in numbered calico bags using the rig mounted cone splitter with duplicates, blanks and standards placed in the sample sequence and collected at various intervals. The calico sample bags were then placed in green plastic bags for transportation. Samples were secured and placed into bulka bags for transport to the ALS Laboratory in Adelaide, an accredited Australian Laboratory. Once received by ALS in Adelaide, all samples where pulverise to 85% passing 75 microns (Method PUL-23). For samples that were greater than 3kg samples were split prior to pulverising. Once pulverised a pulp was collected and sent to ALS in Perth for a 50g portion to be subjected to fire assay and AAS finish (Method Au-AA26). Where results returned are >100 ppm Au (over range), the assay is determined using method Au-GRA22. The laboratory undertook and reported its own duplicate and standard assaying. Laboratory QA/QC samples involving the use of blanks, duplicates, standards (certified reference materials) and replicates as part of in-house procedures. The sample sizes are considered appropriate to the grain size of the material being sampled. Selective anomalous samples from selective holes, identified within the mineralised zones may be further analysed by ALS Laboratories utilising a screen fire assay technique (Method Au-SCR22AA) to provide a more representative sample of the heterogeneous or coarse gold. Analysis was conducted on the bulk material that remained after the pulp was removed during the initial 50-gram Fire Assay.
Manhattan DD:where mineralisation has been potentially identified in the logging of Diamond core, the core is cut in half at a facility in Broken Hill, with samples generally collected over a one metre interval. Intervals less likely to be mineralised are quarter cored with samples collected over a 2 m interval. Samples are placed in smaller bags and placed in a larger bulka bag and sealed for transport to ALS in Adelaide by secure freight. Diamond core is submitted for analysis using the same methods as RC drilling.
Quality of assay data and laboratory tests
The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.
Nature of quality control procedures adopted (e.g., standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (if lack of bias) and precision have been established.
Kennecott Exploration (Australia) Ltd Trench -Both aqua regia (AAS) & screen fire (Screen FAS) assay techniques have been used, the former is near total digestion and the latter is consider a total digestion technique. SGS in Sydney reported the results - industry compliance from SGS is assumed.
2017 IP Survey - IP data was reprocessed by Fender Geophysics in 2022.Ground IP survey (Time domain Induced Polarisation/ Resistivity). Array: Dipole-Dipole Array (DDIP). Station spacing: 100m. Line spacing: 200m apart and 150m apart. Line length: 1.5km. Line direction: East - West.
TechGen 2022 and 2023 Soil Sample -The samples were delivered to ALS Laboratories in Brisbane. Samples were crushed and pulverised. Samples were assayed by fire assay Au-AA24 and some by ME-MS61 following digestion. This is considered an estimation of total gold content. A package of multi- elements was also assayed for. The laboratory used internal standards to ensure quality control. The assaying and laboratory procedures used are considered appropriate for the material tested.
TechGen 2023 Drilling Reverse Circulation (RC).The samples were delivered to ALS Laboratories in Brisbane. Samples were crushed and pulverised. 2022 samples were assayed by Fire Assay. This is considered an estimation of total gold content. Samples were also assayed for a multi-element suite by ICP-AES following a multi-acid digestion. 2023 Samples were assayed by PhotonAssay. This is considered an estimation of total gold content. Multielements were no assayed. The laboratory used internal standards to ensure quality control. TechGen also inserted standards and blank standards into the sample sequence submitted for assay. The assaying and laboratory procedures used are considered appropriate for the material tested. No geophysical tools were used in determining element concentrations.
Manhattan RC & DD: Geological data was collected using a computer-based logging system, with detailed geology (weathering, structure, alteration, mineralisation) being recorded. Sample quality, sample interval, sample number and QA/QC inserts (standards, duplicates, blanks) were recorded on paper logs and then collated and entered to the logging system. This data, together with the assay data received from the laboratory, and subsequent survey data has been entered into Micromine Software, then validated and verified. The data will be loaded into a secure database.
Verification of sampling and assaying
The verification of significant intersections by either independent or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
Kennecott Exploration (Australia) Ltd Trench -Recent drilling supports the grades obtained in trench sampling.
TechGen 2022 and 2023 Soil SampleThe assay results were checked by separate company personnel. Sample number, GPS coordinates and description were recorded in the field into a notebook. No adjustment has been made to assay data.
TechGen 2022 and 2023 Drilling Reverse Circulation (RC).Significant intersections have been independently verified by external consultants and TechGen personnel. Twinned drill holes are not considered necessary at this stage. Field data was collected onto paper log sheets and then entered digitally. The assay results were checked by separate external consultants and company personnel. Sample number, GPS coordinates and description were recorded in the field. No adjustment has been made to assay data.
Manhattan RC & DD:results were reviewed against the logged geology and previously reported intersections. Geological logging was completed by electronic means using a ruggedised tablet or computer and appropriate data collection software. Sampling control was collected on hard copy and then entered excel software before being loaded into Plexer Commercial Database System and loaded into Micromine Software for checks and validation. The primary data has been loaded and moved to a database and downloaded into Micromine Software, where it has been further validated and checked. None of the previously drilled RC or Diamond holes were twinned during this initial drilling programme. Results are stored in an industry appropriate secure database. No adjustment to assay data has been conducted
Location of data points
Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Kennecott Exploration (Australia) Ltd Trench- Maps from GS 19861200 with the trench location and assay results were registered using streams and known shaft locations, plus knowledge of on ground disturbance. The 220 m trench was then divided into 44 samples and the centre point of each sample was registered and E and N extracted, in GDA94/MGA94 Z56. Individual trench samples are deemed to be accurate to +- 15m. Previous GPS location of trenches could not be located, but location plans of the trench in Zenith reports are similar to the field validated location of these points.
2017 Ground IP-Ground IP survey location of data points using a 12 channel GPS receiver
TechGen 2022 and 2023 Soil Sample -Sample locations were taken from a Garmin handheld GPS unit. The grid system used is GDA94/MGA94 Zone 56. Topographic control is considered adequate at this stage +/- 1Om.
TechGen 2022 and 2023 Drilling Reverse Circulation (RC).Drill hole location coordinates were taken from a Garmin handheld GPS unit. Downhole surveys were collected using a reflex North Seeking Gyro tool. The grid system used is GDA94/MGA94 Zone 56. Topographic control is considered adequate at this stage +/- 1Om, although hole locations will be resurveyed where possible to at supply adequate RLs for sectional interpretation.
Manhattan RC & DD:The drill collar positions were determined by GPS using a waypoint averaging collection method (± 2m). Drill Collars will be surveyed by a licence survey if required for further evaluation work such as for resource estimation. The grid system used is Map Grid of Australia 1994 - zone 54. Surface RL data was approximated using a Digital Elevation Model created from SRTM Data. Variation in topography is less than 5 metres within the project area.
Data spacing and distribution
Data spacing for reporting of Exploration Results.
Whether the data spacing, and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied.
Whether sample compositing has been applied.
Kennecott Exploration (Australia) Ltd Trench -Sample compositing by collecting 5 m channel samples is appropriate for this type of mineralisation. Uncut results have been presented in the body of this report and as per below. Trench results average 160m @ 1.15 g/t Au, with (0.1 g/t Au cut-off and maximum dilution of 5 m, no top cut) or 160m @ 0.68 git Au (0.1 git Au cut-off and maximum dilution of 5m and arbitrary 5 g/t Au top cut applied - not enough statistical data to provide a top cut). Details of individual 5m samples are shown in Appendix 3).
2017 Ground IP -Ground IP survey (Time domain Induced Polarisation/ Resistivity). Array: Dipole-Dipole Array (DDIP). Station spacing: 100m. Line spacing: 200m apart and 150m apart. Line length: 1.5km. Line direction: East - West. The spacing is industry standard and appropriate for the size of the mineralising system and known disseminated pyrrhotite within the mineralised envelope.
TechGen 2022 and 2023 -Soil Sample - 25 x 25 m to 50 x 50 m sample points which produces unbiased data suitable for the style of mineralisation explored for.
TechGen 2023 Drilling Reverse Circulation (RC).Results shown in Figures and reported in Tables in body of this report. Data spacing is varied but the drill holes reported are along three/four separate drill lines with spacings between holes of 30 m - 60 m. Data density is appropriately indicated in the on driII hole location plans and cross section images. No Resource or Ore Reserve estimates are presented.
ManhattanRC & DD: Drill spacing is not adequate to constrain or quantify the total size of the mineralisation at New Bendigo and Clone and further drilling is required.
Orientation of data in relation to geological structure
Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type.
If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.
Kennecott Exploration (Australia) Ltd Trench -the 290-degree trending trench is oriented at exact right angles to the mineralised vein orientation (NNE at 40 to 60 degree dip), but oblique to the stratigraphy (trending NW)
2017 Ground IPE-W lines are appropriate for the known mineralisation trend NNE to N-S and oblique to stratigraphy.
TechGen Soil Sampling 2022 and 2023- Soil sample grids are square, and by default are orientated to best intersect the lithological and structural trends at right angles.
TechGen 2022 and 2023 Drilling Reverse Circulation (RC).Mineralised quartz veins observed at surface are orientated roughly NNE dipping at 40 to 60 degrees east. As above, based on observations to date, sampling is considered unbiased... To accurately sample the interpreted orientation, drillholes were oriented across the interpreted mineralised bodies, perpendicular to the interpreted strike of mineralisation. Holes were given a design dip of -60 degrees. No sampling bias from the orientation of the drilling is believed to exist.
Manhattan RC & DD: Drill testing is at too early stage to know if sampling has introduced a bias. Drilling was generally orientated to be approximately perpendicular (in azimuth) to the known strike of the lithological units at New Bendigo. All intervals are reported as down hole widths with no attempt to report true widths. Diamond Core was completed to assess structure and mineralisation controls.
Sample security
The measures taken to ensure sample security.
Kennecott Exploration (Australia) Ltd Trench -Chain of custody information from historic companies is not available.
TechGen Soil Sampling 2022 and 2023 -Samples were taken and delivered to ALS Laboratories by company personnel.
TechGen 2022 and 2023 Drilling Reverse Circulation (RC) and Soil Sampling.Samples were taken and delivered to ALS Laboratories by company personnel.
Manhattan RC & DD:Chain of Custody was managed by Manhattan staff and its contractors. The samples were transported daily from the site to Tibooburra where they were secured in Bulka Bags and freighted to ALS in Adelaide for analysis. Core from diamond drilling was placed in trays, logged, and processed on site. The core was then secured and freighted Broken Hill for cutting and sampling
Audits or reviews
The results of any audits or reviews of sampling techniques and data.
Kennecott Exploration (Australia) Ltd Trench -No audits have been undertaken.
TechGen 2022 and 2023 Soil Sampling and Drilling Reverse Circulation (RC) and Soil Sampling.Sampling techniques are consistent with industry standards. No formal audit has been completed on the data being reported.
Manhattan RC & DD:No Audits or reviews have been conducted on the completed drilling or results. An initial structural review has been completed and forms the basis of information contained within this release.
Section 2: Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section)
Criteria
JORC Code explanation
Commentary
Mineral tenement and land tenure status
Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting along with any known impediments to obtaining a license to operate in the area.
John Bull Project:The John Bull Project is located on EL 8389 and EL 9121. EL 8389 is owned 90% by TechGen NSW and 10% by Mr Sloot. EL 9121 is owned by TechGen NSW.
Details of the binding term sheets are listed in the body of the release
The project is within private grazing pastures
The TechGen tenements fall within the Grafton-Ngerrie Local Aboriginal Council. There are no Native Title Determinations or active Claims over the tenements. This area will be monitored for the lodgement of a new claim.
Tibooburra Project:
The Tibooburra project comprises tenements EL7437, EL8688, EL8691, EL9092, EL9094 and EL9202 and are held by Awati Resources Pty Ltd, a wholly owned subsidiary of Manhattan
Details of the binding term sheets are listed in the body of the release
The tenement package is covered by two separate Native Title Claims. The Malyangapa Combined Proceedings (NC2022/0002) and the Wongkumara people (QC2008/003). The region is administered by the Tibooburra LALC based in Tibooburra
The tenements are currently in good standing and there are no known impediments.
Exploration done by other parties
Acknowledgment and appraisal of exploration by other parties.
John Bull Project
Kennecott Exploration (Australia) and Southern Goldfields 1983 and 1985, completed a 220m long costean and highlighted the potential of the area. Mapping of veins and old workings/sluicing, plus selected rock chip sampling and stream sediment sampling in the district, was also conducted.
Fender Geophysics completed 3 IP lines in 2017
Zenith Minerals vended into the project in 2020, and completed field trips including some mapping
TechGen Metals Ltd 2022/2023 competed additional field work including grid soil sampling which highlighted an exceptionally high-order gold anomaly over 0.9 km long and 250m wide, and drilling including 17 RC drill holes for 2249.5 m, plus re-processing IP. Other work includes rock chip sampling.
No other known work of relevance has been undertaken by other parties.
Tibooburra Project
Proto Resources and Investments completed an RC drilling program at the Pioneer and Phoenix project in 2006
Meteoric Resources completed RAB and Aircore drilling at the New Bendigo, Phoenix, Pioneer and The Kink prospects in 2011 and 2012. RAB holes at New Bendigo returned very strongly gold anomalous results that highlighted the potential for significant gold mineralisation at the New Bendigo Prospect. Meteoric Resources also completed soil, stream and rock chip sampling across selected areas of the tenure.
Awati Resources completed diamond drilling in 2016 at New Bendigo as part of the NSW department Co-operative Drilling Program and followed up with an RC drilling program in 2018. confirming the gold anomalies in the 2011-2012 RAB drill program.
Manhattan Corporation completed additional RC drill programs at New Bendigo, Clone, Phoenix and Pioneer. Identifying a substantial high-order gold anomaly at the Clone prospect
Geology
Deposit type, geological setting, and style of mineralisation.
John Bull Project
The target consists of abundant sheeted veins in a thermal aureole in Permian-Carboniferous sediments around a large Triassic Granite, in a NE trending zone. The target style is Fort Knox/ similarities to the recent Snowline discovery in the Yukon. The mineralisation is interpreted as a reducing IRG, with Au (As) late stage sheeted veins hosted in micro-monzodiorite, greywacke and reducing black shale. Other intrusions within the target area include trachyte, lamprophyre and dolerite. A regional NW trending structure truncates geology in the John Bull target area
Tibooburra Project
The Tibooburra Project covers the Tibooburra and Koonenberry Greenstone Belts. The district is widely regarded as the northern extension of the Victorian Goldfields. The project is located at the boundary between two major orogens (Delamarian and Thomson) and mineralisation consists of high-grade laminated quartz-sulphide veins hosted within Cambrian sedimentary rocks intruded by Devonian granites within a tightly folded and faulted domain.
Drill hole Information
A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes, including Easting and northing of the drill hole collar, Elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar, dip and azimuth of the hole, down hole length and interception depth plus hole length.
If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.
John Bull Project
Presented in Appendix 1 and figures within text for drilling, with trench and soil results presented in Appendices 2 and 3.
Tibooburra Project
Manhattan RC results for Clone are presented in Appendix 4, and figures within the body of the release.
Manhattan diamond drilling results for New Bendigo are presented in Appendix 5 and within the body of the release.
Manhattan released several announcements pertaining to earlier rounds of drilling at New Bendigo, including significant intercepts listed in the body of this release. These results are referenced in the Manhattan Release dated 10/07/202326, and not repeated here.
Data aggregation methods
In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (e.g., cutting of high grades) and cut-off grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths of high-grade results and longer lengths of low-grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent values should be clearly stated.
John Bull Project
Kennecott Exploration (Australia) Ltd Historical sub-horizontal 5 m composite channel samples taken (non-biased) were reported with no top cut and calculated at approximate 0.2 g/t Au cutoff and up to 20m internal dilution
TechGen drilling results 2022 were provided at > 0.15 g/t Au with intervals >0.5 g/t Au stated with no top cuts or metal equivalents and up to 4m internal dilution
TechGen drilling results 2023 were provided at > 0.5 g/t Au with intervals >1 g/t Au stated with no top cuts or metal equivalents and up to 3m internal dilution
Tibooburra Project
Weighted average techniques to report aggregated gold have been used where appropriate.
Intersections tabled in this release have been calculated using a 0.5 g/t Au lower cut (Results <0.5 g/t Au) on the first reported assay. Manhattan RC and DD drilling results were provided at a 0.5 g/t Au cut-off and 2 m internal dilution.
Relationship between mineralisation widths and intercept lengths
These relationships are particularly important in the reporting of Exploration Results.
If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (e.g., 'down hole length, true width not known').
John Bull Project
Trenching and drilling is perpendicular to the mineralised vein orientation and oblique to stratigraphy. Drill hole dip angles at 60 degrees provide intercepts that are close to true width (estimated 80 to 90%)
Tibooburra Project
All intervals reported are down hole intervals.
Information and knowledge of the mineralised systems are inadequate to estimate true widths.
Diagrams
Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported. These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.
Refer to the body of the release for appropriate maps and diagrams.
Balanced reporting
Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.
John Bull Project
All significant intercepts previously published by TechGen are presented Appendix 1. All soil samples > 100 ppb Au are reported in Appendix 2. trench sample results are reported in Appendix 3.
Tibooburra Project
Manhattan RC results for Clone are presented in Appendix 4, and figures within the body of the release.
Manhattan diamond drilling results for New Bendigo are presented in Appendix 5 and within the body of the release.
Manhattan released several announcements pertaining to earlier rounds of drilling at New Bendigo, including significant intercepts listed in the body of this release. These results are referenced in the Manhattan Release dated 10/07/2023, and not repeated here.
Other substantive exploration data
Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.
John Bull Project
Additional data not reported here is rock chip sampling from several companies and stream sediment sample data. These data support the documented understanding of the project but cannot be suitably validated for inclusion
Tibooburra Project
Passive Seismic Surveys: Passive seismic surveys have been used using a Tromino instrument as a guide to estimating cover depth in various locations. The technique is not quantitative and can only be used as an indicative guide until actual cover depths are substantiated by drilling.
Aeromagnetic Surveys: Previous explorers have completed regional-scale, high quality aeromagnetic surveys over some of Awati's lease holding.
Further work
The nature and scale of planned further work (e.g., tests for lateral extensions or depth extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.
John Bull Project
detailed 1:500 scale to 1:2,000 scale mapping, focussing on lithological and structural controls on mineralisation at John Bull
Extensional soils to the north and south of current coverage
Infill 25 m x 25 m spaced soil sampling where current coverage is 50 m x 50 m
Multielement assaying of the latest TechGen drilling program samples
> 2,000 m of drilling including >500 m of diamond drilling in H1 2025 in phase 1. Drilling will be aimed at testing down dip and along strike of current open intercepts, testing targets north and south of current drilling and testing structural - lithological intersections to be defined by new detailed mapping.
Work to be conducted on the Western tenement includes stream sediment sampling for 100% coverage, and ridge and spur rock chip sampling, plus grid soils and mapping.
Tibooburra Project
Detailed 1:500 scale to 1:2,000 scale mapping including rock chip and channel sampling, focusing on lithological and structural controls on mineralisation at Clone, New Bendigo and Phoenix/ Pioneer.
Grid soil sampling along the Clone trend, plus pXRF multielement analysis, plus infill and extensional soil grids along the Pioneer and New Bendigo trends.
Stage 1 > 2,000m of RC drilling in H1 2025 to test the high-grade mineralisation at Clone at depth, along strike and down plunge.
Aircore drilling along strike of the Clone to test up to 10km of mineralised trend under cover on broad spaced lines
Relogging and re-sampling of diamond drill intercepts, plus pXRF analysis of drill pulps where available prior to drill testing the down plunge extension of New Bendigo.
No Section 3 or 4 report as no Mineral Resources or Ore Reserves are reported in this Appendix
_______________ 26 Refer to ASX news release by Manhattan Corp dated 10/07/2023 - New High-Grade Gold Discovery